Unofficial archive. This is a read-only, community-run archive of the Apple Support Community. It is not affiliated with or endorsed by Apple Inc.

Import video to Aperture library on Mountain Lion

I was on OS X Lion and all worked perfectly, but when I've installed Mountaion lion and Aperture 3.3.2... It can't import any types of video files to Aperture library now.


When I go to File -> Import -> Files ... it shows me an empty folder (if there is video only) or photos:


User uploaded file


When I drag and drop any video file to Aperture icon, it says:


User uploaded file


So, if I import video file to iPhoto library and then open it in Aperture, it can't play video:


User uploaded file

User uploaded file


I've searched about this problem, but I couldn't find anything. I don't know where's my mistake. Maybe Aperture on Mountain Lion has bug?

99 replies

That is indeed not funny, but for me the import of all kinds of videos to Aperture works well. What is the type of videos you are trying to import?


Just to make sure - you have not by any chance accidentally excluded videos from import in the import settings? That section of the import settings is missing from your screenshot.


User uploaded file

Thank you for quick reply. But, please, look on the first picture more carefully 😉


http://farm9.staticflickr.com/8013/7690424708_c0b3aed4c4_c.jpg

Your pictures were showing like below, thanks for the second link. But what is the file type of your videos? mpeg, quicktime movies, AVI?

See the list of supported video formats: http://support.apple.com/kb/HT4025


This list is not exhaustive, Aperture may support more formats than listed below, but any codec mentioned clearly should be supported.


User uploaded file

It was .MOV from iPhone and .MP4 from Canon camera. Any ideas?

It was .MOV from iPhone and .MP4 from Canon camera. Any ideas?


I cannot test with .MOV from iPhone, but .MOV from the iPod touch and Canon and all movies play well.


Have you installed any third party video codecs lately, like the 3ivx codec?


Can there be permissions problems with the folder you are importing from?

Aperture has been known, to not to be able to play video, if the library is in a shared folder.


I'd try to do some general Trouble Shooting Basics, repair the permissions of the Library, remove the preferences.

Trouble Shooting Basics doesn't help me. I have tried everything before I asked for help to this forum, of course.


I haven't installed any codecs for Mountain Lion. What codecs can you recommend to install?

I have Perian (http://perian.softonic.de/mac) installed and Flip 4 Mac (http://flip4mac-wmv-windows-media-components-for-quicktime.softonic.de/mac), for better video compatibility with Windows media, but I think it is unlikely that missing codecs are your problem, if you could view the videos before.


I mentioned the codecs, because some third party codecs interfere and even may cause Aperture to crash, for example:

Aperture 3: May be unresponsive or have slower performance with third-party video codec

I do have exact the same problem as you, in2om!


Not only that I can't import videos from my Canon SX230 (.mov-files), which worked fine under the very same version of Aperture (3.3.2) under Lion, but also I can't play my old video, that is already in the library.


And the same thing here with iPhoto, I can import and playback here, even the old video!


BTW, I did remove that 3ivx-codec, but it did not help!

I can't believe it 🙂 I still can't find anyone with the same problem all over the Internet.


Now what can we do? 😁

I reported this strange behavior to Apple, using the "Feedback" within Aperture.

They aked for a System Report and a movie-file, which I sent.


Now the only thing we can do is to wait. If they can solve the problem, I will report here!

Well, I'll wait for any news from you 🙂

I got the same problem

it couldn't be import any type of videos in Aperture


I use the same library file in Aperture and iPhoto, it's shared.

in iPhoto, I could import video and play it, works good.

but when I enter Aperture and use the same library which is video imported

the video shows, but the thumnail is corrupted, and video isn't playable.


i've tried clean install mountain lion

and after finished, I just install one software Aperture

at this time, Import video funtion works good.

but after I rebuilded my mac on this clean installtion

the problem's emerged.

Guys, let's write a list of applications that we have installed. Maybe so we can find an "unnecessary" application. I'll begin.


1Password

Adobe Photoshop CS6

Aperture

AppCleaner

Blackmagic Disk Speed Test

BreakTime

Cyberduck

Disk Drill

Dropbox

Dropbox

Firefox

iPhoto

Google Chrome

iWork '09

Opera

PhotoSweeper

Skitch

Skype

Spotify

TextExpander

Transmission

Twitter


I think the problem in an "unnecessary" app. Who has the same apps? 🙂

the software we both installed:


adobe cs6 series

aperture

appcleaner

dropbox

iphoto

google chrome

iwork09

skype

So it comes to


aperture

appcleaner

dropbox

iphoto

google chrome

iwork09

skype


that the three of us have installed.


But I do have Adobe Photoshop Elements 10.

Good! 🙂 Now, I think we can exclude follow apps:


Aperture

AppCleaner (very simple app)

Dropbox (simple too)

iPhoto


And problem may be with:


Google Chrome

iWork'09

Skype


I'll try to remove these applications and we look at the results.

So. It doesn't helped me. I removed all of these apps and some different plugins. iPhoto is still working right, Aperture does not. 😠

User uploaded file

Maybe you can also use the "Feedback" within Aperture, and maybe you will also be asked for your System Reports, and maybe they can figure out, what the three of us have in common.


Lots of "maybe"s....

I've sent 🙂

I have the s 00004000 ame problem but I am running Lion 10.7.4. with Aperture 3.3.2 I've discovered my.MOV videos won't play but my MP4 videos will play ok. Both formats played fine before. Also .MOV files display like a photo but don't display video icons(play, stop, etc) in Aperture but they do display a video camera icon in the bottom right of the thumbnail preview. I've also reported this to Aperture support. I reckon we'll just have to wait for an Aperture update.😟

I've also just noticed Aperture will play newly imported .MOV files. This problem appears to only affect .MOV files imported prior to update. Not sure is this due to Aperture update or Lion update.

But you can import any MP4 files in your library? And you can see it in import window? I can't.


User uploaded file

I'd like to correct my previous comment:

#"This problem appears to only affect .MOV files imported prior to update. "#


I have discovered other .MOV files that were imported prior to update and they play ok.

As it stands:

I can play some MP4 videos and some .MOV videos regardless of when they were imported.


Possible Solution:

I always save copies of my Aperture Projects in my Pictures folder so I tried re-importing one of the .MOV and .MP4 videos that wasn't working, from my Pictures folder and this worked for me.

If you are trying to import new videos then try this

  1. Import your video to your desktop?
  2. Click Import in Aperture.
  3. Click on your Macbook Library
  4. Click on Desktop and select your video.

Not ideal but fingers crossed.

I also discovered if you drag and drop a video onto the Aperture icon that it saves it in the iPhoto Library even though I have it set to Aperture.

Good Luck!🙂

pmack1, maybe we have different problems. In my case, Aperture can't to import and play any video files. You can read my first post with screenshots. 🙂

Sorry in2om, I see what you mean.

I think this is most likely an Aperture or Mountain Lion bug.

However I used this site last year to check that all my apps were fully compatable with Lion. It will give you the status on all apps compatability with Mountain Lion as well.

http://roaringapps.com/apps:table

Dear in2om,


Thanks for posting - firstly, my issues after a clean install of ML and my favorite apps on my 2011 iMac are:

  1. Unable to import new .MOV files from EOS 5D Mk II
  2. Unable to play previously successfully imported files from the same camera


I haven't installed iPhoto and tested it.


I noticed the issue after a message popped up asking me some crap about unsupported files, which I foolishly dismissed a few times before it hit me... I was trashing footage that I now cannot get back 😠... so I searched and found your post (after updating my import procedures to a more distrustful state...).


I am not experiencing the same issue on my mid 2009 MacBook Pro after a clean install of ML with less apps, so your thinking about there being a conflict with another app is also my opinion.


Thus far I have performed the following steps (if I haven't listed a step here, it has not happened):

  1. Install ML from recovery partition on 2TB drive after clean format - Mac OS Extended (Journaled)
  2. Install Aperture from App Store
  3. Restore Aperture Library in question
  4. Test video playback (success)
  5. Test import (success)
  6. Previously imported videos generated their thumbs


So, a clean install of ML and Aperture fixed the issue. I'll post again when I find the app that breaks it for me (it's been a long night)...


Cheers,

AJL.

Thank you for your detailed response. I removed some apps already and it didn't help me. Maybe the problem in some codecs or something else. Anyway we will wait new reply from you.


Have a good night :)

I have installed and run a host of applications and have not been able to break Aperture again.

The only apps I haven't tested from other posts are Chrome, AppCleaner and PS Elements.


I have resolved the issue for myself following the steps in my earlier post.

I will be sure to post the cause back if it breaks again but for now I'm sorted.


Note - this was a clean build - no import tools were used and all prefs were set up again from scratch.


Time for a fresh start 🙂.


Regards,

AJL.

Have exactly the same problem. Can't import any videos. AVCHD videos that worked previously can no longer be imported. They don't even show in the import screen anymore.

Thanks, but I'd rather wait some time, because I do not want to install all my apps again

Might be a plugin. What plugin's are you people using for aperture?

I don't think the problem comes from the plugin


i've tried reinstall the system(not clean install)

after that, the aperture plugin folder's empty

but the problems still happen

Solved the problem. I downloaded the final release of Mountain Lion (I previously had the gold master installed and hadn't bothered to download the final release) and reinstalled it over my existing gold master install. Worked perfectly after that. Took about 10 minutes to complete. I am not sure whether it was an issue with a corrupt file in the Gold Master or whether it was just an issue with the Gold Master itself but the final release seems to resolve it.

So. Have you lost all previous apps or any settings after reinstalling Mountain Lion?

Hallo in2om,


yesterday my problem was solved.

First I reinstalled (and updated) Aperture again, but this did not help.


Then I started from the recovery partition (cmd-r during start) and reinstalled Mountain Lion. No, you won't loose anything (but have a backup anyway!!). I did not have the Golden Master (as TheWrongStuff had), but the "normal" release fom the AppStore. But reinstallation helped anyway!

Now I am able to import again, and play my "old" movies, as it used to be!


Anyway, Apple is interested in my Aperture Library, I will send it to them on Monday. If they find out anything else, I will report here.


Just try to reinstall Mountain Lion, you can't do anything wrong doing this, I hope it works for you, too.


Have a nice weekend!

When you reinstall you don't lose anything. Just reinstall over the existing install. It takes a short period of time and your machine will be the same way it was before, except Aperture is fixed.

hi, in2om

I've checked the information in console

it seems the problem here


Aperture[543]: Failed to communicate with qtkitserver: Connection invalid

Aperture[543]: Failed to initializeServer(), returned 5


maybe you should check yours

in2om


I forgot one thing to tell you

this error message happen to quicklook app too


I've checked

quicklook (space on video file) and preview app both coundn't play the video file


maybe the problem's here?

I've been struggling with this same issue now for a day, and thankfully found this discussion. After re-installing AP 3.3.2 I could not play or import movies. The referenced movie files were fine, but AP was not operating correctly.


So taking Bergmann's and WrongStuff's advice, I re-installed Mountain Lion from the recovery disk. I had to wait about 3 hours for it to finish....but it worked!


The only issue I found was the poster frames (thumbnails) for most of the movies need to be refreshed manually.


BTW, my problem began after I did a full restore from Time Machine, due to a corrupt system file.


I've notified Apple Professional Applications Support of this issue.


Thanks, guys!

Thanks Philip. I also did a time machine restore after my drive failed so this might be the cause. Only thing in my case was my drive failed on DP4 and I installed Gold Master after that so the installation of Gold Master should have fixed it if that was the problem.

Thank you all for taking part in the discussion.


Finaly my issue is solved 😀 It seems previous installation was corrupt. I've reinstalled my system just, it took about 40 minutes to complete. Now it has some new changes, but general settings aren't changed.


Before reinstall my login wasn't in the status bar, for example:


User uploaded file


Now all works perfectly.


Good luck.

Hi All,


I may have found the root cause. I run a clean script, and one of the tasks is to clean out caches. Specifically, the following location was being cleaned out:


/System/Library/Caches/


Re-installing Mountain Lion as per Gerhard's post (which resolved the issue for me before I found the cause - thanks Gerhard 🙂), replaces a file in this folder called:


com.apple.xpchelper.cache


I haven't found the file in any other location, so I've made a copy of it for safekeeping.


So - if you want to test this, move this file from /System/Library/Cache and reboot - it will break Aperture video.

Replace the file and reboot and it's fixed. I haven't investigated what the file does exactly, but open with TextEdit and you'll see it's pretty integral to the system.


Time Machine does not back this location up, so restoring won't fix, however if you have a copy on hand you can replace it and resolve very quickly.


I hope this helps...


Regards,

AJL...

to reinstall osx could resolve the problem

but the problem happen again after restore the current system from time machine


anyone tested it on 10.8.1 update?

AJL.

Thanks for you time invested in finding the problem!


This indeed worked for me. com.apple.xpchelper.cache is the problem for sure I believe. I could not play my existing videos or import new ones.


lin qi-zhen

Re-installing 10.8.1 does indeed add com.apple.xpchelper.cache to the directory /System/Library/Caches/


link to 10.8.1

http://support.apple.com/kb/DL1571


Aperture FIXED! 😉

FYI, if that file is missing problems with Aperature aren't the only side affect. Just spent two hours trying to get AVI files to play using quicklook and turns out to be due to the same problem. I recently restored from time machine and that file was missing.

After the last update it stopped importing again 😠


Can someone share com.apple.xpchelper.cache with me (and not just)?

<Link Edited by Host>

Thanks for your quick reply.


It just works! 🙂

So was the com.apple.xpchelper.cache file missing entirely or was it somehow corrupted?

The file is missing entirely.

Interesting... I wonder if some sort of cache cleaner app is responsible for this.

I think you nailed it man. Cheers to the coordinated effort! The dropbox file really saved me time!

After a Time Machine restore I had the issue described by the OP. I did not have a copy of com.apple.xpchelper.cache in my /System/Library/Caches/ folder. I used the file posted by AJL. and after a reboot it immediately resolved the problem. Thank you! I can now import new videos into Aperture and view my previously imported videos.


Some extra info: currently (and prior to the Time Machine restore) I am using OS X 10.8.2 and Aperture 3.4.3 (both the current versions). I did a Time Machine restore from an AirPort Extreme with a USB HDD attached. The restore seemed to work fine except for Aperture. (I think I recall having to rebuild my Aperture library prior to its first use due to it not starting properly.)

Similar thing as ClimbrJohn happened to me:


I upgraded my hard drive and was able to get a copy of com.apple.xpchelper.cache from the old hard drive. File copy and reboot yielded similar results.


OS X 10.8.2 and Aperture 3.4.3 (current versions). I did a Time Machine restore from a Time Capsule. The restore seemed to work fine except for Aperture.

AJL! You are the best!


This is exactly the problem with my system. I have recently reinstalled OSX via Time Capsule Backup. Going to


/System/Library/Caches


com.apple.xpchelper.cache did not exist. Thanks to you again, I was able to get this file and once I rebooted, my .AVI, .MOV, and .MP4 videos were able to be played! The thumbnails were still all kinds of messed up, but easily fixed by recreating them.


APPLE NEEDS TO READ THIS! This is important. It hasn't been fixed in over 6 months, it would appear. I'm sure I wasn't the only one aggrivated by this problem, and I am sure there are less Tech savvy people still suffering.

OK, after being troubled for a couple of months with my Aperture not importing new and not playing old videos, and after following the advice about the xpchelper.cache file and being ready to re-install Mountain Lion, I got an epiphany, which apparently has solved the issue for me.


What I did was to remove all the extended attributes from the files in my Pictures folder. I used the command


xattr -cr Pictures


And presto, functionality for videos returned to normal.


It appears that the only folder I can't remove the extended attribute from is one of my vaults, which resides in the Pictures folder, but that doesn't seem to create any problem. From what I saw, at some point in time, arround May or June, an upgrade must have added extended attributes to several of my folders, including the Aperture library. I can tell when that happened because I file my picture per month, so all folders including the 2012_05 folder had the extended attribute, but not the 2012_06 folder.


I can now enjoy my videos in Aperture!!!!!

I have just done a Time Machine restore and found this problem too.


Thank you to everyone who found out what has gone wrong and how to fix it, and a special thanks to AJL for hosting the missing com.apple.xpchelper.cache file.

Replacing the cache file worked for me! Thanks for figuring this out!

com.apple.xpchelper.cache

Thank you so much - the cache file solved all my problem too 🙂

Thank you so much, I have had the the same problem with playing the movies in Aperture,


once again thank you for the file "com.apple.xpchelper.cache"


greetings from Germany

Thanks for the file! Got me going again after hard drive replacement and restore from time machine.

I had the same problem after time machine restore, reinstall of ML helped, thanks! 🙂

Thanks AJL...your a genius. I had the same problem and the file was not present. I added it and now vides are able to downloaded and played once again. Did you figure out how this file was removed. Like others, I did a restore after adding larger HD and found this issue after.

I had this issue when doing a restore of a hard drive that failed using the WIFI based installaton and restore. I.e. start the machine, connect to a wifi network and start the restore process, then connect to a Time Machine to finish.


I recently upgraded to a Macbook Air and connected both laptops together (FireWire with a Thunderbolt to Firewire adapter in the Air) and had no issues at all.


This may mean that the issue is specifically related to a wifi install unless someone here can verify that 00004000 they used another method to install ML.

No, it is definitly not a wifi related problem. I had this issue when I restored my system from a NAS which was connected via LAN - so I am pretty sure it is a TimeMaschine problem.

Sorry, I think you misunderstood me. What I meant by a wifi restore is when you have a hard drive failure and insert a new hard drive, the new machine now prompt you to connect to wifi so it can create the initial restore process directly from Apple. It then downloads the install files and installs a copy of mountain lion without you having to insert a disk. (it also prompts you for the option to restore from Time Machine)


The alternative to this is installing via USB which installs a fresh copy of Mountain Lion without having to download it (or if you have a new machine the software is already installed).


So, my theory is that something is the wifi (internet) based restore process is broken but a fresh install seems to be fine.

Ah, ok, my fault, now it is clear to me. Thanks for the explanation.

Further to my comment in my previous page, on this subject, I recently had to copy my Aperture Library to my Macbook, from the iMac it usually resides in. Of course, doing that meant that I had to relocate all the master files etc. but it also had the side-effect of my videos not showing again. I tried the xattr solution, I had applied on the iMac, but no good results. So I just restored the com.apple.xpchelper.cache file, from the link supplied in this thread, and presto!


Worked like a charm again.

Well i have had EXACTLY the same since HD replacement under warranty which then was restored via TM .

I have chased my local store many times in the several months since this to express the problem but have been told on many occasions it has been cuased by me and not this .

I have been pulling my hair out in frustration and cant believe Apple have not even let loyal customer know of this BIG problem.


Many thanks to AJL for resolving this . Is there a way to make TM back this up to ensure this does not happen again ??


Lee

Hi Brisbane Lee,


In short, I have not been able to get Time Machine to back up this file from its native location.


The following command is supposed to let you specify files to back up, but I tested it and it doesn't work for me:

sudo tmutil removeexclusion /System/Library/Caches/com.apple.xpchelper.cache


Interestingly enough, the /System/Library/Caches location does get backed up, just not the contents.


I have chosen to copy the file to /System/Library/XPCServices which does get backed up (IMHO this is where the system should reference the file from anyway - and if I can figure out how to do that then I'll let you all know - Apple can send me a pay slip ).


The cause of my issue was some commands I run to clean up my system, part of which was flushing this location. So now I have added a few lines to copy the file back after cleaning the caches. I don't know why the file is being removed for other people, but I suspect maintenance apps could be involved given it is a cache directory.


Regards,

AJL

Before this issue, I had said cache files can not lead to these kind of problems, because if they are corrupted or missing at all, the system will normally rebuild them. So IMHO it is a really strange problem. I am a liitle disappointed and surprised too, that Apple does not do anything to fix this issue - as far as I know.


Regards,

Togart

I can import .mov files and play them fine on my iMac but not on my Macbook Pro.

Neither machine had the /System/Library/Caches/com.apple.xpchelper.cache file on it.

I downloaded from the drop box as per several replys ago and rebooted - no help.

Because my iMac Aperture works fine without this file I think the problem is unrelated to the missing cache file but admittedly for most of you that seems to fix (or nudge) the problem.


Respectfully,

Kay Fisher

slightly OT, since I don't have Aperture to play with, but

sudo /usr/libexec/xpchelper --rebuild-cache

also replaces the 'missing' file


I did check quicklook-playing an (xvid via perian) avi file, which is another reported problem solved by restoring the file - sure enough, it would not display, with repeated log messages :

com.apple.quicklook.satellite[202]: Failed to communicate with qtkitserver: Connection invalid

com.apple.quicklook.satellite[202]: Failed to initializeServer(), returned 5


restoring the cache using xpchelper, & rebooting, seemingly allowed quicklook to work again as expected.

Thanks very much for helping out with this problem.

After installing the Cache file from a other Mac with Aperture all is fine for me again, can import video from iPhone and all, and can play the video's again in Aperture.


The problem on my system was caused bu cleaning (system) cache using IceClean, so that's one clean action I will skip in the future 🙂


Thanks again to everybody who contributed to this issue, my Aperture is doing well again

Cheers

Piet

One more remark to this issue on my system.

Before re-installing the cache file in Finder scrolling thru video directories the preview/content wasn't showed at all, just the circle turning and turning, now I have a picture from the movie agian

So, this is also repaired with the install of the cache file, and not only the Aperture problem with video's

Just for information, perhaps it' s helpfull

Cheers

Piet

Hi Ajl,


I ran into the same problem not being able to import videos into aperture. If possible could you also please provide me with

com.apple.xpchelper.cache ? It would be a great help.


Thank you

If you really want to restore the xpchelper.cache instead of reinstalling, use the Terminal command that andyBall_uk posted in this thread - you do not need to download a file.


Re: Import video to Aperture library on Mountain Lion


But reinstalling the system would be safer; restoring the Cache will mitigate the symptoms, but not fix the source of the problem. You must have installed something, that requires that this Cache file is necessary, and this should not be the case.

Restoring the missing cache file /System/Library/Cache/com.apple.xpchelper.cache using andyBall_uk's terminal command (Re: Import video to Aperture library on Mountain Lion) and then a reboot enabled quicklook to play AVI files on my mac again.


Can somone enlighten us as to what this file does and also the xpchelper command used to restore this file ?

I replaced the hard drive in my Mac a while ago and quicklook played AVI files just fine after that. Then just the other day I was looking at the same and newer AVI files created by my secuirity camera and noticed that the quickllook preview and thumbnails where not being computed.

I can't pinpoint exacty what applications were installed/removed/updated on my mac be 00004000 fore this occured.

If you open a Terminal and type the command "man xpchelper" you will see the following manual entry:


NAME

xpchelper -- XPC helper agent



SYNOPSIS

xpchelper



DESCRIPTION

xpchelper performs services on behalf of the XPC IPC facility.



This command is not intended to be invoked directly.

This command is run, when Mt. Lion is installed, and is only to be run by system services, not directly!


The xpchelper cache is used by the xpcd daemon for XPC services, which undocumented. The file is in a property list format and contains entries for a variety of standard applications;

I tested what happens, when I remove the file. On none of my macs (two iMacs, three MBPs with different Intel processors) the removal if this file did cause any problems. Videos were playing well. Which makes me assume, that a healthy system should be able to run without this file in its cache. And if this is not the case, something must have been installed, that is corrupting the system library, so that Aperture has problems without this cached file.

That is why I am worried, that simply restoring the xpchelper file will only obscure one of the symptoms of the problem and not heal the problem with the system installation, so you may run into the same problem again later.

Reinstalling the system will be a safer solution in this case, even if it is much more trouble. It should suffice to reinstall on top of the current system - no clean install necessary. A clean install would defeat the purpose, because you would have to reinstall all your apps afterwards and probably reintroduce the very same problem by reinstalling the app that is causing all this.


Regards

Léonie

In my case the file needs to be present for video to function, no application was causing this.

I tested a full clean Install of 10.8.2 and install of Aperture only. After removing the cache file and rebooting, the video breaks immediately for me.


This issue was actually causing me to lose footage.

Apple needs to fix this, it's not good enough. All I presented was a quick fix to help people - andyBall_uk has taken it to another level discovering you can just rebuild the file (genius).


Until Apple rectify this flaw, the decision to reinstall the entire OS as a way to run the command vs. simply running the command is discretionary I guess.


I know what I would choose (big thanks andyBall_uk)!!!

AJL,

I have read your post and the whole thread - and I am impressed by what you found out and it helped many people here, and I like Andy's solution on how to restore the missing helper file using a terminal command.


But for me it is clear that the missing xcphelper file cannot be the primary reason of the problem with your videos. It is more so, that it is the final straw that tumbles an otherwise already broken system. As I said, on none of my five macs removing this file caused a similar problem with videos. I also asked other frequent posters here to check this out, and none of them could confirm on their systems that removing this file will cause the videos to break. xpchelper is used for all kinds of other apps, and all are working. One of your system frameworks must be working differently from mine. And for me the big question is, what application or utility installation caused the exchange of a library framework, so that all of a sudden this cached file is neaded to be present on some systems. It must be a multimedia app or driver, since only videos are problematic. It occasionally happens, that installing some third party application will replace a dynamic library by an older version that is incompatible with your the current system, and then all of of a sudden completely other applications will crash or have problems, see for example Aperture and Final Cut 4.


My only concern is that by adding this file you will be patching a broken part of your system instead of replacing it by a working one. Restoring the broken part to its original version will require reinstalling - and it is not such a big issue, since you can install on top of the old system.


Until Apple rectify this flaw

It is very unlikely that this is a flaw caused by Apple, unless you can confirm that you are not running any piece of software on your mac that has not been created by Apple, and that each and every part of your software has been updated and is specified to be compatible with your current MacOS X version.


Regards

Léonie

>> I also asked other frequent posters here to check this out, and none of them could confirm on their systems that removing this file will cause the videos to break


I mentioned here & in the lounge thread that quicklook of avi video failed


>>did check quicklook-playing an (xvid via perian) avi file, which is another reported problem solved by restoring the file - sure enough, it would not display, with repeated log messages :

com.apple.quicklook.satellite[202]: Failed to communicate with qtkitserver: Connection invalid

com.apple.quicklook.satellite[202]: Failed to initializeServer(), returned 5


restoring the cache using xpchelper, & rebooting, seemingly allowed quicklook to work again as expected.


I can't explain why yours works w/o the file, although it's been suggested that only some formats show up the problem. Reinstalling OS X (in logs here, anyway) runs much the same terminal command & moves the created file into place - maybe your & other logs will show if that just doesn't happen, or if it's removed later.

Thanks for chiming in, Andy. I did not know how to reference your post in the Lounge.


Quicklook works fine on all my macs, with or without xcphelper, also for all AVI files I tested. But can you post a link to a video that does not play on your system without the cached file, so I can check that on my Mac?

It may sound stupid, but have you rebooted your machine(s) after removing the file in question? It seems that the system check for the file when booted, from then on, if the file is there, videos work, if not, they do not work.

Hi


I used the first one I saw, sitting on another desktop - it happened to be a 750MB avi

mpeg-4 xvid , no idea if that's significant. So no link, sorry. If I check more & find one, will post again.

It may sound stupid, but have you rebooted your machine(s) after removing the file in question?

Good idea, John. Yes, sure I did reboot. I even checked my backups. On one of my Mac Book Pros seems to never have been an instance of xcphelper since more than a year, and still videos are working well in Aperture.

Andy, thanks a lot.

Meanwhile I found two .AVIs that are hanging, when I try to preview them without xpchelper. But both of them are using Microsoft mp4 codecs and would not even play, if I had not flip4mac installed, and that is not Apple standard software. What do you have installed, to make AVIs play?

LeonieDF, it was just a thought. 😉 😀

it was just a thought. 😉😀

That's what I thought! 🙂 😀

>>did check quicklook-playing an (xvid via perian) avi file, which is another reported problem solved by restoring the file - sure enough, it would not display,

(xvid via perian) avi file


I have disabled Perian, because it installs the 3ivx codec, which can be causing Aperture to crash or hang.

I'll try perian later; I have two avis, that need Perian. But if perian does not work without a cached file installed, it is a bug in Perian - after all, a Cache is a temporary storage, that an application should not rely on to be filled.

a 'bug' in more than Perian, if you believe that missing files should never upset an app or codec...


I tested a .mov file, after removing Perian & restarting, it also fails to 'quicklook' with similar errors

it's from a camera, with mono sound, but has always played w/o any special codecs afaik, and still plays in Quicktime w/o Perian


MPEG-4 video (mp4v)

PCM-MU-LAW (ulaw)


again, rebuilding the cache & restarting seemingly allows it to quicklook as expected. I'll test with a clean install of 10.8.2 sometime, but it's not Perian related here. So, not all movies, but some - the few mp4's I checked were fine, as you found.

sorry, still off-topic regarding Aperture, but

same .mov video, new install of 10.8.2 after erase, no files/settings migrated except the video

quicklook worked normally... removed xpc cache, restarted, no quicklook... rebuilt cache, restarted, works again.

So I just had this bug. Very odd, same as everyone else. Aperture used to import video then stopped. I had installed Free Flip4Mac a couple weeks ago. This is the first time I used Aperture since.


Found this thread. Deleted Flip 4 Mac. Restarted with cmd-r. Reinstalled Mountain Lion.


Fixed! How weird. Thanks everyone!

Just like to re-iterate...


I hade this problem also, it wasn't due to any recently installed software; it happened after having a hard disk fault and having restored from Time machine back-up. As previously described all videos looked corrupted and won't play or even import anymore.


The command line fix (using xpchelper worked perfectly) - nice one Andrew.

As a software dev I can say that im very confident that the video issue was not directly caused by the initial HD corruption i suffered (my first thought); it was a side effect of the full restore.

The fact that all my videos that were corrupted across a number of years of writing to different parts of the main disk, this issue just would not be manifesting itself as showing this kind of corruption.


In short, I trust that the command line fix was all that was needed.

And also that an apple fix is sorely needed for that!

Can this file be reposted? I see the link is gone. My Time Machine does not seem to have it either. I am having this problem now with Aperture 3.4.5. Anytime I load a card with video on it the Loading Assets wheel spins on and on. I have to copy the movie files off the card using finder and then delete them from the card for aperture to final load it. I do not like having to store my videos seperately!


Thanks!

Jacquie

Thank you Nigel. They deleted your reply again but I got it in my email. Appreciate the response!!! Thanks so much!!!

I don't know why they deleted it the second time as I explained what it was and why I was posting the link!


Anyway glad you managed to get the link and download it.

Didn't work for me afterall. Stuck loading assets for over an hour. 😟