Unofficial archive. This is a read-only, community-run archive of the Apple Support Community. It is not affiliated with or endorsed by Apple Inc.

Bootcamp install windows to black screen

I am running Macbook 12 inch (early 2015), trying to install Window 10 through bootcamp.


It was working fine until latest OS update, but then having ACPI issues when booting up Windows so I attempted a reinstall of Windows.


I don't know why but I can't complete a reinstall.


I run Bootcamp assistant, point it towards my windows 10 iso, set my windows partition size and then let it run.


After it downloads the drivers, it asks me for permission, then it reboots to a black screen.


I am so frustrated. Anyone have any tips or suggestions?

15 replies

It depends on your Mac year/model. There are two places.


1. If supported by your Mac, it is on the USB installer, as shown on the first page of this discussion where a screen shot of the USB Installer file structure is posted.

2. If your Mac is a 2015 or later model, it is stored in OSXESERVED, an internal partition. In this case, you cannot edit the file, but you will need to remove the current BC partition and start over again, so a new one is built again. It should be built correctly. See Learn More section of How to install Windows on your Mac with Boot Camp - Apple Support and Bootcamp Assistant Help for further details.

spacecadet610 wrote:


Not sure what you are referring to "end up starting the BCA process again".

... is what I meant.


spacecadet610 wrote:


With the failed BCA windows install rebooting to black screen, I manually restart to Mac OS, re-run BCA which restores my partition removing the OSXRESERVED partition. So I don't believe I need to do that step you talk about.

This is the standard method. Since OSXRESERVED has been deleted, we cannot use this method.



Is there anything else I can try?

If you have another Windows PC, please use Windows Media Creation Tool and create a USB Installer. Once you have the USB Installer, run BCA and download Windows Support Software to a second USB, using


User uploaded file


Copy the Windows Support Software to the root of the Windows Installer USB. This creates a USB Installer for the Mac. Run Disk Utility and create a FAT32 partition of the size you want Windows to be. Run SMC and NVRAM Reset, connect the USB, reboot Mac, and hold Alt/Option key and select EFI Boot. Test and report any errors.


If this does not work, and you are running OS X 10.12.1, roll back to 10.12 using a Time Machine Backup and retry the BC Assistant procedures again.

In the drop down list of formats when creating a partition, i have "MS-DOS (FAT), ExFat", then 4 types of Mac OS Extended (Journaled, Encrypted, or Case-sensitive options).


Camera pic attached, like i said, no options to install anywhere. Where the heck are my partitions?

User uploaded file


Booted back to Mac OS and used Disk Utility to delete the Windows partition and got the space back no problem.

MSDOS or FAT will work. The reason you do not see any drives is because there is not storage driver loaded? Does your USB have $WinPEDriver$ that came from the BC Assistant Windows Support Software download?


Your USB should look similar to (ignore the 5.1.5621 folder) ...


User uploaded file

Ah ok i had the WindowsSupport drivers folder in root of my USB drive instead of the actual contents of the folder.


Now Windows installer doesn't even ask me where to install. It just automatically tries to install but then gives me an error message.


User uploaded file


Why would the exFAT partition be invalid?

Hi spacecadet610,



Follow this link-

BootCamp fails to start after upgrade to MacOS Sierra 10.12.1


If you are running with 10.12.1 with MacBook Retina 2015. There are a couple of us having similar problem.


I could complete the bootcamp assistant installation (except when it come to a point when it ask whether you trust "Broadcom Bluetooth Driver Vendor" , I CLICK NO" and the bootcamp setup continue and will reboot.


I'm able to use Windows 10 as per normal BUT no bluetooth capability though.


Regards Wayne

Your partitioning is correct for a 2015/2016 Mac. You can also see it documented in https://help.apple.com/bootcamp/assistant/6.0/ .


You do not need an external USB.


Can you run the following two procedures


Reset the System Management Controller (SMC) on your Mac - Apple Support

How to reset NVRAM on your Mac - Apple Support


You may end starting the BCA process again, which would mean deleting (not erasing) the OSXRESERVED partition manually using Disk Utility. Please use the '-' sign to remove OSXRESERVED. Be very careful on where you click, otherwise you will lose data. You should have an OS X backup for safety.

Ok I'm all set! Thanks Loner T! Here is what I believe was going on:


I had a USB drive connected when I started the boot camp process. After a few failures, Loner T said something that made me realize I had the USB drive connected so I removed it. Because I had so many failures, I took his advice and reset SMC and NVRAM, both of which were ridiculously easy (links are here and here). I ran through boot camp again and this time it worked without any trouble.


Bottom line: Remove any external drives before starting boot camp. If you already failed the install with a drive connected, reset SMC and NVRAM and try again.


Thanks Loner T!! My last Mac was about 3 years ago and I recall the boot camp process to be crazy simple so I was very surprised at what a hassle this was. Now it's easy again 🙂

I have no external storage connected to my mac.


Could something be wrong with my partitions?


My partitions before bootcamp assistant runs:

/dev/disk0 (internal):

#: TYPE NAME SIZE IDENTIFIER

0: GUID_partition_scheme 251.0 GB disk0

1: EFI EFI 314.6 MB disk0s1

2: Apple_CoreStorage Macintosh HD 250.0 GB disk0s2

3: Apple_Boot Recovery HD 650.0 MB disk0s4


/dev/disk1 (internal, virtual):

#: TYPE NAME SIZE IDENTIFIER

0: Macintosh HD +249.7 GB disk1

Logical Volume on disk0s2

A4BBAFEA-F291-4B26-BB27-3EC986643A13

Unencrypted


My partitions after bootcamp assistant runs after it partitions and is about to restart:

/dev/disk0 (internal):

#: TYPE NAME SIZE IDENTIFIER

0: GUID_partition_scheme 251.0 GB disk0

1: EFI EFI 314.6 MB disk0s1

2: Apple_CoreStorage Macintosh HD 201.4 GB disk0s2

3: Apple_Boot Recovery HD 650.0 MB disk0s3

4: Microsoft Basic Data OSXRESERVED 8.0 GB disk0s6

5: Microsoft Basic Data BOOTCAMP 40.7 GB disk0s5


/dev/disk1 (internal, virtual):

#: TYPE NAME SIZE IDENTIFIER

0: Macintosh HD +201.0 GB disk1

Logical Volume on disk0s2

A4BBAFEA-F291-4B26-BB27-3EC986643A13

Unencrypted


/dev/disk2 (disk image):

#: TYPE NAME SIZE IDENTIFIER

0: J_CCSA_X64FRE_EN-US... +4.1 GB disk2


/dev/disk3 (disk image):

#: TYPE NAME SIZE IDENTIFIER

0: Boot Camp +775.5 MB disk3

Not sure what you are referring to "end starting the BCA process again". With the failed BCA windows install rebooting to black screen, I manually restart to Mac OS, re-run BCA which restores my partition removing the OSXRESERVED partition. So I don't believe I need to do that step you talk about.


I did just try resetting both the SMC and NVRAM. It didn't fix anything. BCA still reboots to a black screen after partitioning.


Is there anything else I can try?

Ok some progress.


I followed your instructions. When I run disk utility, I didn't have option to create FAT32 so I did EXFAT, making a 40gb partition.


I can reboot into EFI and get the Windows install going, but it can't find any drives to install the OS on. The list of installation options is empty.


Why does it not see the partition I made? Maybe this is why it wasn't working the standard way. Is there something wrong with my SSD drive?


This is output of 'diskutil list' after making my windows partition:

/dev/disk0 (internal):

#: TYPE NAME SIZE IDENTIFIER

0: GUID_partition_scheme 251.0 GB disk0

1: EFI EFI 314.6 MB disk0s1

2: Apple_CoreStorage Macintosh HD 210.7 GB disk0s2

3: Apple_Boot Recovery HD 650.0 MB disk0s3

4: Microsoft Basic Data Windows 39.2 GB disk0s4


/dev/disk1 (internal, virtual):

#: TYPE NAME SIZE IDENTIFIER

0: Macintosh HD +210.3 GB disk1

Logical Volume on disk0s2

A4BBAFEA-F291-4B26-BB27-3EC986643A13

Unencrypted

spacecadet610 wrote:



I followed your instructions. When I run disk utility, I didn't have option to create FAT32 so I did EXFAT, making a 40gb partition.

In the drop down list of formats, did you see MSDOS or FAT?



I followed your instructions. When I run disk utility, I didn't have option to create FAT32 so I did EXFAT, making a 40gb partition.


I can reboot into EFI and get the Windows install going, but it can't find any drives to install the OS on. The list of installation options is empty.


Why does it not see the partition I made? Maybe this is why it wasn't working the standard way. Is there something wrong with my SSD drive?

Do you see any disk when you are asked where to install Windows? Can you post a screen shot of the exact error message? I do not see an issue with the disk, because you were able to create a partition. Can you try deleting the partition and check if you get the deleted space back in main OS X partition?

How large is your AutoUnattend.xml file? If it is not too large, can you post the contents of the file?


Here is what it should look like...



<?xml version="1.0" encoding="utf-8"?>

<unattend xmlns="urn:schemas-microsoft-com:unattend">

<settings pass="windowsPE">

<component name="Microsoft-Windows-Setup"processorArchitecture="amd64"publicKeyToken="31bf3856ad364e35"language="neutral"versionScope="nonSxS"xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">

<UserData>

<ProductKey>

<WillShowUI>Always</WillShowUI>

</ProductKey>

</UserData>

</compone 00004000 nt>

<component name="Microsoft-Windows-PnpCustomizationsWinPE"processorArchitecture="amd64"publicKeyToken="31bf3856ad364e35"language="neutral"versionScope="nonSxS"xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">

<DriverPaths>

<PathAndCredentials wcm:keyValue="1" wcm:action="add">

<Path>$WinPEDriver$</Path>

</PathAndCredentials>

</DriverPaths>

</component>

</settings>

<settings pass="specialize">

<component name="Microsoft-Windows-Deployment"processorArchitecture="amd64"publicKeyToken="31bf3856ad364e35"language="neutral"versionScope="nonSxS"xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">

<RunSynchronous>

<RunSynchronousCommand wcm:action="add">

<Order>1</Order>

<Path>cmd /c "FOR %i IN (X F E D C) DO (FOR /F "tokens=6" %t in ('vol %i:') do (IF /I %t NEQ "" (IF EXIST %i:\BootCamp\BootCamp.xml Reg ADD "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Environment" /v AppsRoot /t REG_SZ /d %i /f )))"</Path>

</RunSynchronousCommand>

</RunSynchronous>

</component>

</settings>

<settings pass="oobeSystem">

<component name="Microsoft-Windows-Shell-Setup"processorArchitecture="amd64"publicKeyToken="31bf3856ad364e35"language="neutral"versionScope="nonSxS"xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">

<FirstLogonCommands>

<SynchronousCommand wcm:action="add">

<Description>BootCamp setup</Description>

<CommandLine>%AppsRoot%:\BootCamp\setup.exe</CommandLine>

<Order>1</Order>

<RequiresUserInput>false</RequiresUserInput>

</SynchronousCommand>

</FirstLogonCommands>

</component>

</settings>

</unattend>

It's all greek to me but mine looks different than yours at the end.


<?xml version="1.0" encoding="utf-8"?>

<unattend xmlns="urn:schemas-microsoft-com:unattend">

<settings pass="windowsPE">

<component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">

<UserData>

<ProductKey>

<WillShowUI>Always</WillShowUI>

</ProductKey>

</UserData>

<ImageInstall>

<OSImage>

<InstallToAvailablePartition>true</InstallToAvailablePartition>

</OSImage>

</ImageInstall>

<DiskConfiguration>

<WillShowUI>Never</WillShowUI>

</DiskConfiguration>

</component>

<component name="Microsoft-Windows-PnpCustomizationsWinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">

<DriverPaths>

<PathAndCredentials wcm:keyValue="1" wcm:action="add">

<Path>$WinPEDriver$</Path>

</PathAndCredentials>

</DriverPaths>

</component>

</settings>

<settings pass="specialize">

<component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">

<RunSynchronous>

<RunSynchronousCommand wcm:action="add">

<Order>1</Order>

<Path>cmd /c "FOR %i IN (X F E D C) DO (FOR /F "tokens=6" %t in ('vol %i:') do (IF /I %t NEQ "" (IF EXIST %i:\BootCamp\BootCamp.xml Reg ADD "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Environment" /v AppsRoot /t REG_SZ /d %i /f )))"</Path>

</RunSynchronousCommand>

</RunSynchronous>

</component>

</settings>

<settings pass="oobeSystem">

<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">

<FirstLogonCommands>

<SynchronousCommand wcm:action="add">

<Description>Remove Boot EFI</Description>

<CommandLine>cmd /c del /Q %AppsRoot%:\efi\boot\bootx64.efi</CommandLine>

<Order>1</Order>

<RequiresUserInput>false</RequiresUserInput>

</SynchronousCommand>

<SynchronousCommand wcm:action="add">

<Description>BootCamp setup</Description>

<CommandLine>%AppsRoot%:\BootCamp\setup.exe</CommandLine>

<Order>2</Order>

<RequiresUserInput>false</RequiresUserInput>

</SynchronousCommand>

</FirstLogonCommands>

</component>

</settings>

</unattend>


Don't know why it would be different. I downloaded the files from Boot Camp Assistant