Unofficial archive. This is a read-only, community-run archive of the Apple Support Community. It is not affiliated with or endorsed by Apple Inc.

is it possible to run two OS X on one macbook pro?

I just bought a new MacBook Pro with OS X Lion on it and discovered it would not read the plugins of an oline, text based, MUD I play. I cannot afford to, nor do I wish to, run Windows on my laptop.


My game ran perfectly well on the previous laptop I was using, which I do not have access to now, and I was wondering if it is possible to run both Lion and Snow Leopard on the same HD.


Okay if that is doable, for the previous laptop I bought the Snow Leopard upgrade but will that be sufficient to get OS X 6 up and running in what would concievably be a non apple space?


I hope I am making enough sense here. I am not an IT technician and just thinking about doing this makes my brain fizz.


Btw I have been informed by other mac players in my game that Lion does not support the plugins of the Front End I use and the people who have upgraded and run into this problem have gone out and bought windows which they run on BootCamp or a parallel program and gone with a windows based Front End. I do not have the money to go this root and am looking for a solution which will is cheaper and will have nothing to do with windows.


I hope someone out there can help thanks.

20 replies

It may be possible to run the older OS, but this is not recommended as hardware changes for newer systems will not be supported on the older OS versions, and may result in system instability if used.

You cannot run Snow Leopard on a machine that was shipped with Lion.

It's possible to install Snow Leopard on the MBP, but the process to do so is a bit complicated. You will need access to a Mac that does run Snow Leopard.


The simplest solution is to clone a Snow Leopard 10.6.8 system to your MBP. First, add a new partition to your MBP:


Step One: Put the MBP into Target Disk Mode:


You need a Firewire cable to connect the two computers. Then follow these instructions: Transferring files between two computers using FireWire. You will boot the MBP into Target Disk Mode and boot the other computer normally.


Step Two: To resize the drive do the following:


1. Restart the MBP and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer 00004000 and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.


After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.


2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.


User uploaded file


3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)


4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.


You should now have a new volume on the drive.


It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.


Step Three: Clone using Restore Option of Disk Utility


  1. Boot the MBP into Target Disk Mode.
  2. Open Disk Utility from the Utilities folder.
  3. Select the destination volume from the left side list.
  4. Click on the Restore tab in the DU main window.
  5. Check the box labeled Erase destination.
  6. Select the destination volume from the left side list and drag it to the Destination entry field.
  7. Select the source volume from the left side list and drag it to the Source entry field.
  8. Double-check you got it right, then click on the Restore button.

Destination means the new partition on the MBP's drive. Source means the Snow Leopard computer's drive.


Alternatively, you can clone the Snow Leopard system to an external drive, then restore the clone after connecting the external drive to the MBP.


A more complicated process involves using a 16 GB USB flash drive to which you would install Snow Leopard using the Mac that runs Snow Leopard. The Snow Leopard DVD installs 10.6.3, so after installing Snow Leopard onto the USB flash drive you need to update the system to 10.6.8 using the Mac OS X 10.6.8 Update Combo v1.1. Now, boot your MBP from the USB flash drive and clone the Snow Leopard system to the new partition on your MBP's hard drive.

I thought that with the exception of the current mac pros, you could not run a version of the OS older than the one that came with the machine, no matter how you get it on that machine.

Apple includes a list of current and past systems in its OS releases, which it compares to the system its running on, which in most cases will prevent the OS from loading; however, in some cases it does work since model numbers are similar (even if hardware is slightly different).

Ok.

X423424X wrote:


I thought that with the exception of the current mac pros, you could not run a version of the OS older than the one that came with the machine, no matter how you get it on that machine.

Since the newest MBP models, that are currently being produced, are very close to the early 2011 models that did come with Snow Leopard it is possible mlto install SL on the new models. But you need a specific build, Point release, of SL for it to install. That is either 10.6.7 or 10.6.8 and if you use 10.6.7 you must update to 10.6.8 for all the hardware to work correctly. Earlier builds will not install on the newest MBPs.

With the exception of new MBAs and Minis extant models originally ran Snow Leopard but versions 10.6.4 and above. Unfortunately, the retail disc is 10.6.3 so it cannot be installed on these machines except by using the original discs with which they shipped before Lion was being pre-installed. So unless the newest models are hardware dependent on Lion they should be able to run Snow Leopard 10.6.8.

I really appreciate all the effort you guys have taken to respond to my plea but I have no idea what a MBP or MBA is and it seems to be getting way too technical for me.


It does seem to be an awful lot of work for a text game that doesnt even support Macs and I have no wish to start down a road that might end up compromising the OS on my new MacBook.


And Softwater I did go ahead an look at what that other guy wrote and it makes Kappy's instructions look like a toddle.


I have neither the money or IT know-how to do what is recommended. Thanks again for your input.

MBA = MacBook Air

MBP = MacBook Pro

MB = MacBook

MP = Mac Pro


Why don't you just purchase Parallels and install Windows in Parallels so you can run Windows concurrently with OS X. You can even install XP in Parallels.


Parallels is a type of emulation software.

What MUD game is this? I would be very surprised if the only plugins were PowerPC only. It would be easy to recompile them for intel.

KeaCrazy wrote:



And Softwater I did go ahead an look at what that other guy wrote and it makes Kappy's instructions look like a toddle.



Yes, certainly not a recommended approach by any means. I would second Kappys advice on installing Parallels and running windows in virtual mode that way, if your Mac does not support Snow Leopard.


Good Luck


Pete

Thanks again for being so supportive, at the moment I cannot afford to purchase a windows OS.


etresoft the game is DragonRealms run by Simultronics. A guy who was a player I think used to update the plugins as new mac OS's came out but he left about two years ago hence my dilemma. I am not very impressed that this company charges me to play the game while not supporting mac players beyond making available a front end which is very clunky and slow to play without plugins.


Is it Intel that is the problem? Is intel new to macs?


Oh and thanks for the explanation of the abreviations, it was a real *duh* moment 🙂

KeaCrazy wrote:


Is it Intel that is the problem? Is intel new to macs?



No, Intel has been around for many years now in Mac, but with Lion, the older PPC coding that was included up until 10.5 and then could also be run in a Rosetta emulator in 10.6 is no longer supported after all these years. Updates may be useless for the game if it is a PPC program.


Good Luck


Pete

KeaCrazy wrote:


etresoft the game is DragonRealms run by Simultronics. A guy who was a player I think used to update the plugins as new mac OS's came out but he left about two years ago hence my dilemma. I am not very impressed that this company charges me to play the game while not supporting mac players beyond making available a front end which is very clunky and slow to play without plugi 00001D88 ns.


Is it Intel that is the problem? Is intel new to macs?

I guess I'm going to need more help. This is outside my area of experience.


Which plugins, specifically, are/were you using?


This seems to be a pretty old game - it is text based, after all. I can imagine there would be PowerPC software for it that might not be updated. However, because it is a text-based games, it is likely that the software could be easily made Lion compatible if you could access the source. I could give you more information if I knew where to look. Also, there could be Linux software that offers similar capabilities. That software could likely be easily compiled on the Mac.

petermac87 wrote:


Yes, certainly not a recommended approach by any means. I would second Kappys advice on installing Parallels and running windows in virtual mode that way, if your Mac does not support Snow Leopard.



KeaCrazy wrote:


... and the people who have upgraded and run into this problem have gone out and bought windows which they run on BootCamp or a parallel program and gone with a windows based Front End. I do not have the money to go this root and am looking for a solution which will is cheaper and will have nothing to do with windows.



AND: Here's a suggestion for you, Pete -- take the time to go and read the OP BEFORE you go throwing mud on other poster's suggestions...

Oh, don't bother Michael; this poster - once known as Mulligan's Missus before getting banned - is a renonwned troll. He does it to get exactly the rise you just gave him. One of the unfortunate ones among us.

... that explains SO MUCH! Thank you!


As said by the actress Misha Barton in the movie The Sixth Sense: "I'm feeling much better now!"

Ah Softwater I thought you took your bat and ball and crawled off to your blog after having moderators remove one of your posts. Things not going too well over there I see so you have come back, this time to do little more than disparage QuickTime in every thread possible. Your reference to a banned user is wrong but so is much more you say. The forums have been rather friendly during your absence except for Michael hijacking every thread with his virtuality.


Please offer more to threads than cheap insults, or personal opinions.


Thank you, I don't bite at trolls like you as I once did.


Pete