Unofficial archive. This is a read-only, community-run archive of the Apple Support Community. It is not affiliated with or endorsed by Apple Inc.

Installing Snow Leopard (and Rosetta) in Parallels 7 in Lion - PART ONE

For reasons that have been expressed very often on this forum (primarily Rosetta and the ablitity to run PPC-apps) many people have been asking me to put together in one place the results of my research on this topic. I have taken all of the research that I have found, and refined and improved much of it.


This thread, as Part One, will look at the long process for completing this result; the so-called "not easily accomplished in three steps" process. It will be followed later by my and hopefully others, suggestions for the "easy" way.


Why the long process first?


• Some people appreciate being able to roll up there sleeves, do it yourself and achieve the satisfaction that comes from successful completion of the project;


• Just like I have made improvements to what I found in my research, I expect others will offer improvements to what I have to offer; and


• If the "easy" way is offered first, there will be little encouragement to improve the long process.


What is needed:


• Installation of Parallels 7 in your Lion computer - I will expect this step has already been completed.


• A fresh copy of the Snow Leopard Installation DVD (and not a machine specific, nor restore disk that may have come with your computer).


• Use of the programs Disk Utility and Terminal, both of which are in the /Applications/Utitities/ folder.


What are the steps that will be taken:


1. Preparation of the Snow Leopard Installation DVD for use in Parallels 7


2. Installation of Snow Leopard into Parallels 7 (and optionally installing Parallel Tools)


3. Upgrading Snow Leopard to 10.6.8 and other available upgrades


4. Creating a backup of the completed process.


I will be offering each step, one at a time...

45 replies

Mutassi wrote:


This doubt may sound a little dumb but I'm such a noob in these subjects, are all these steps able to do in a computer that came with lion from factory? 'cause i had been looking for downgrading my OS in order to use apps like Logic 8 (and so on...) but the answers i found differ in this: so if you had a computer that came with snow leopard in the beginning and you upgraded to lion you can downgrade to snow leopard again, but if you have a computer that came with the lion OS from factory there's no possible way to downgrade to snow leopard. That's the reason of my question 'cause i don't want to waste any money purchasing the snow leopard dvd in order to make the partition you're talking about if it's not going to work.


Thank you very much in advance, please answer as soon as you can!


1. What computer did you purchase?


2. Is Logic 8 a PowerPC application that requires Rosetta?


3. Do you have a MobileMe subscription?


4. Will you need iCloud?


I am a bit confused... If you own a Lion based computer that can be downgraded to Snow Leopard, won't you have to purchase Snow Leopard in any event to effect the downgrade?


If you have a MobileMe subscription you can acquire the Snow Leopard Install DVD for free... Log into your MobileMe account.


PS: I was once told by a former chief justice of the california supreme court that there are no dumb questions; only dumb answers!

Step One - Preparing the Snow Leopard Installation DVD


1. Insert a fresh Snow Leopard Installation DVD into your drive and launch Disk Utility (/Applications/Utilities/). You 00004000 can obtain this DVD cheaply from the Apple Store with free shipping (as of April, 2012).


2. Select the device for your optical drive (note that this is NOT the Mac OS X Installation disk, but rather the device that has mounted it; in this example the device is named "SuperDrive”). BE VERY CAREFUL HERE!


User uploaded file


3. From Disk Utility’s File menu, choose “New > Disk Image from [device]” from the File menu, set the image format to “DVD/CD master” and create the disk image on your Desktop.


4. Mount the new disk image by double-clicking the file. You will now have two separate items on your Desktop: the image file and the container named Mac OS X Install DVD.


5. Launch Terminal (/Applications/Utilities/); carefully type the following command (all in one line) into Terminal and then hit Return/Enter:


touch “/Volumes/Mac OS X Install DVD/System/Library/CoreServices/ServerVersion.plist”

Step Two - Installing Snow Leopard into Parallels 7 in Lion


1. Launch Parallels 7 from your Applications Folder


2. From the File menu go to New… and enter your account password when requested.


3. From the New Virtual Machine window select Install Windows or another OS from DVD or image file and click Continue:


User uploaded file


4. In New Installation, in the install from box, select Choose an Image File… then find, select and open the Snow Leopard image file (for example SuperDrive.cdr) created in Step One above, and then click Continue.


5. If Automatic Detection fails, in the next window select Mac OS X and click OK.


6. The default name will be Mac OS X. I like to make it more descriptive by naming it Mac OS X Snow Leopard. Also check the box at the bottom - Customize Setting Before Installation (you can leave the box Share WIth Others Users of This Mac unchecked and click Continue.


7. At the Virtual Machine Configuration window, click Continue.


8. OS X Snow Leopard will now start to be installed into the Parallels Mac OS X Snow Leopard.pvm file located at ~/Documents/Parallels/. As with all Snow Leopard installations, the following selections need to be made, as they come up:


a) Use English for the main language (click on the right arrow).


b) Install Mac OS X (click on Continue).


c) Agree to the terms of the software licensing agreement by clicking Agree.


d) Select the disk where you want to install Snow Leopard by clicking on the Macintosh HD, but DO NOT YET CLICK ON INSTALL


9. In the Utilities Menu to the right of the Mac OS X Installer Menu (at the top of the Snow Leopard installation screen), Launch Terminal.


10 type the following command (including the quotation marks) in Terminal and then click RETURN/ENTER:


mkdir -p '/Volumes/Macintosh HD/System/Library/CoreServices/'


11. Now type this command (including quotation marks) in Terminal and hit RETURN/ENTER:


touch ‘/Volumes/Macintosh HD/System/Library/CoreServices/ServerVersion.plist’


12. Quit Terminal and go back to the installation of Snow Leopard; BUT FIRST: Click Customize and select Rosetta and optionally Quicktime 7 and all printer drivers. Click on OK.


13. Click on Install and the process will take upwards to 30 minutes or more as Snow Leopard is installed into Mac OS X Snow Leopard.pvm.


14. As it initiates Snow Leopard be sure to remember the Account Name and Password you establish.


15. Upon completion the installation process will reboot and you will now have a Snow Leopard Parallels window -- Cancel ANY attempt by Software Update at this time. I recommend the following optional settings in the Snow Leopard environment:


a) Go to Preferences in the Finder menu and make sure that Hard Disks and Connected Servers are selected.


b) Launch System Preferences and go to Date/Time and then Clock and select show seconds


c) In System Preferences, go to Sharing and turn on File Sharing. NOTE: you may have to turn on printer sharing in your Lion environment to access your printers in Snow Leopard.


16. Shut down Snow Leopard. In Lion go to ~/Documents/Parallels/ and make an Alias of the file Mac OS X Snow Leopard.pvm and place the Alias on your desktop to easily double click to launch Snow Leopard. Optionally make a duplicate copy of the Mac OS X Snow Leopard.pvm file (Command-D) for protection.

Boot Order issues:


The implimentation of com.rectalogic.vmware.plist as a DaemonLaunch on boot and shutdown (as described in Step Three, Item 2) should render these issues moot.


The following is a discussion of how Parallels works for any virtualized environment, including Windows and not just Snow Leopard:


As you have attempted, it is a good idea to implement a backup procedure, especially since Parallels Mounter fails to work on the Snow Leopard partition file; that is Parallels Mounter will not mount the contents of the Mac OS X Snow Leopard.pvm in the Finder, as a means to access the files' contents. Here is how I have implemented a solution to this problem in case there are later problems which require Finder level file access:


I took the backup copy of the Snow Leopard partition file created in Step Four and duplicated it again and renamed it: Snow Leopard Mounter.pvm.


Double click Snow Leopard Mounter.pvm so that it launches Parallels, but DO NOT CLICK TO START Snow Leopard at this time.


If this Dialog Box comes up, click Create New.


User uploaded file


In the Parallels menu -- Virtual Machine, go all the way down to Configure...


In the Hardware Tab, click on the + and then on Hard Disk.


In the resulting box, Type should be changed to Existing Image File and click on Location - Choose a File Path.


Go to ~/Documents/Parallels/ to select the Hard Disk image from the original Mac OS X Snow Leopard.pvm file you created (you will have to open a couple of internal files to get to Mac OS X Snow Leopard-0.hdd) and open this file. Then Click OK and click the red button at the upper left to close this Configure window.


Now Click to Start this version of Snow Leopard. When it reaches the Finder, you will see TWO Macintosh HD's: one from the Snow Leopard Mounter.pvm (the Startup Disk for this running of Snow Leopard) and the other from your original Mac OS X Snow Leopard.pvm, which can now be manipulated in the Finder.


When you are done working on the files, shut down Snow Leopard. Go to the Windows menu in Parallels, select Virtual Machines List and you will now have a permanent Window which will allow to select either of the Snow Leopard environments to be launched easily.


OF COURSE: be careful when you work on the files in Macintosh HD of the Mac OS X Snow Leopard.pvm environment so as to not render it unbootable. If you do make a mistake you can launch Snow Leopard Mounter (probably showing as Mac OS X Snow Leopard(1) in the Virtual Machines List) and fix whatever problem you may have caused.

Mutassi:


Parallels 7 has a good reputation for working with USB devices, especially those that do not send data at very high rates. I presume that a music keyboard would not send data at an especially high rate.


User uploaded file


Good luck and I am jealous of your being in Barcelona, sipping wine, eating wonderful food, and meeting beautiful women, while you write your music!!! As Javier Bardem said in Vicki Cristina Barcelona: "Life is Short!"

FangSuede wrote:


As you are not able to post on MacRumors at the moment I wanted to ask what happened when you updated to the latest April 5, 2012 version of P7?

When followed, the MR instruction set only gets a P7 comment to use SL Server.

I am not sure I understand exactly what you mean by: "When followed, the MR [MacRumors?] instruction set only gets a P7 [Parallels 7] comment to use SL Server."


As I expected, Snow Leopard continues to operate fine with the April 5th update:


User uploaded file


My Cautionary Note #3 came in response to an off-site communication I had with an earlier poster here who expressed some "day to day" concerns about the continuing viability of this approach after future Parallels updates and the lack of possible Parallels technical support for the installation of Snow Leopard. While I considered the likelihood of problems with future updates very slim, proper decorum called for the disclaimer.


The MacRumors discussion was hijacked by two posters whose parents really, really wanted them to go to law school. In the hopes that they would move their discussion to another thread, I made a mistake:


In the words of the eTrade Baby: "I guess sending a second private message to someone who has asked not to be sent any more private messages is FROWNED UPON BY THIS ESTABLISHMENT!" Consequently, I have been sent to my crib until early Sunday morning! 😁


You could do fr4nx0r, over on MacRumors, a favor and reply to his post for me that the April update works fine; maybe even copying over the screenshot. Maybe that is what your sentence is suggesting... Thanks!

Apple has come to the rescue of Lion and Mt. Lion users who need to restore access to Rosetta for running their PowerPC applications:


The Apple Store now offers Snow Leopard Server for a 95% discount over its previously offered price: $19.99 + sales tax & shipping.


1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only)


CS2 Photoshop running in Snow Leopard Server installed into Parallels for use in Lion or Mt. Lion:


User uploaded file

[click on image to enlarge]


Adobe now offers Creative Suite 2 (CS2) for free download

Step Three - Updating the Snow Leopard Parallels environment


1. Installing Parallels Tools


a. Double click the Snow Leopard Alias to start Parallels, but do not click to start Snow Leopard.


b. In the Parallels menu - Virtual Machine, go down to Configure… Select Hardware and select CD/DVD1. In the Connect to - box go down to Choose an Image File. Migrate the Open window to /Macintosh HD/Library/Parallels/Tools/ and select the file: prl-tools-mac.iso. Click the red button to close this window and Click Snow Leopard to start.


c. Open the Parallel Tools icon on the Desktop and double click Install and follow the installation instructions. When complete, quit the Installer, eject Parallel Tools and Restart Snow Leopard.


2. Preparation for updating Snow Leopard


a. Open Text Edit in Snow Leopard.


b. Copy the following xml code into a blank open document in Text Edit:


<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN"

"http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<plist version="1.0">

<dict>

<key>Label</key>

<string>com.rectalogic.vmware</string>

<key>ProgramArguments</key>

<array>

<string>/bin/bash</string>

<string>-c</string>

<string>/bin/rm -f /System/Library/CoreServices/ServerVersion.plist; trap "/usr/bin/touch /System/Library/CoreServices/ServerVersion.plist; exit" SIGINT SIGTERM SIGHUP; sleep 999999 &amp; wait $!</string>

</array>

<key>KeepAlive</key>

<true/>

<key>RunAtLoad</key>

<true/>

</dict>

</plist>



c. Save as com.rectalogic.vmware.plist in /Macintosh HD/Library/LaunchDaemons/. BE SURE to save as TEXT and not Rich Text Format.


d. Open Terminal in Snow Leopard from /Macintosh HD/Applications/Utilities/. Enter the following text in Terminal (all in one line) and then hit RETURN/ENTER:



sudo chown root:wheel /Library/LaunchDaemons/com.rectalogic.vmware.plist


e. It will ask you for your Snow Leopard account password; enter it (nothing will appear on screen as you type the password) and hit RETURN/ENTER.


f. Enter the following text in Terminal (all in one line) and then hit RETURN/ENTER:


sudo launchctl load /Library/LaunchDaemons/com.rectalogic.vmware.plist


3. Updating Snow Leopard and other software updates


a. In the Apple Menu in Snow Leopard go to Software Updates...


b. After it Checks for New Software, it will tell you updates are available. Click the Show Details button. My advice is that at this time (May, 2012) all updates should be accepted except for the Apple Software Installation Update 1.0 (which has had some problems and probably only fixes installation problems of software that you would preferably be installing into Lion anyway). You will most likely have to restart after the Software Installation and they may be additional software updates that will appear after a restart. Repeat this process until all updates are complete.


4. Congratulations: you now have a completely functional Snow Leopard environment in Parallels 7 operating in Lion!


Step Four - Backup your Snow Leopard Parallels file


1. Shut Down Snow Leopard.


2. Make a backup of the Mac OS X Snow Leopard.pvm file.


END OF INSTALLATION INSTRUCTIONS

Great job, Michael! Thank you for this! 🙂


In addition, if appropriate, could you please provide some of your research links? While I understand most of the steps, I would like to be able to understand all of them and read more about the techniques utilized.


Initially, I installed Snow Leopard in Parallels using the guide (and your comments) from:


http://www.ivanexpert.com/blog/2011/08/snow-leopard-as-guest-in-a-virtual-machin e-part-two/


which you mentioned in your post:


https://discussions.apple.com/thread/3240973?start=30&tstart=0


in reply to my question on:


https://discussions.apple.com/thread/3240973?start=30&tstart=0


While I stumbled upon that guide before finding your posts, they were immensely helpful in steering me in the right direction. Thank you for that. However, while Snow Leopard in Parallels is finally running, I have experienced a few issues and posted them on the guide's website:


http://www.ivanexpert.com/blog/2011/08/snow-leopard-as-guest-in-a-virtual-machin e-part-two/

http://www.ivanexpert.com/blog/2011/08/snow-leopard-as-a-parallelsvmwarevirtualb ox-guest-os/


Now, I have not yet tried the method you posted here, so I don't know if it resolves those issues, but I am eager to try it to find out. I haven't seen any replies to my questions and I anticipate it will be awhile before anyone responds (last posts there were in November 2011), so if you could share your ideas about the issues I encountered, I would very much appreciate it. I imagine it would be best to do so on that website, but if starting a new discussion on ASC is more appropriate, I am all for it.


Again, thanks for all the hard work that you put into this guide! I look forward to the next installment. 🙂

I do not know of a way to get the newest iMac to downgrade to Snow Leopard or otherwise to boot into Snow Leopard; there is a thread on this forum that was successful in downgrading the mid-2011 Mac Mini from Lion to Snow Leopard, but not without some glitches.


You do not need MobileMe nor iCloud at this time for running your Logic 8 program.


Does Logic 8 require connection by USB or otherwise to musical instruments?


Is there a later version of Logic that will run in Lion?


If not, you may have to install the Snow Leopard in Parallels 7 in Lion solution that I have proposed; and YES: you can install this solution on a new iMac with Lion.


f you can link me to a demo version of Logic 8, I will download it and see if works...


Snow Leopard is available from the Apple Store for $29 with free shipping:


http://store.apple.com/us/product/MC573Z/A

In the Terminal commands in Step Two: there is a space between Macintosh and HD. In the Terminal commands in Step Three there is a space after root:wheel and after load. They are each all one continuous line.


You should be able to copy and paste them correctly, as follows:


mkdir -p '/Volumes/Macintosh HD/System/Library/CoreServices/'


touch ‘/Volumes/Macintosh HD/System/Library/CoreServices/ServerVersion.plist’


sudo chown root:wheel /Library/LaunchDaemons/com.rectalogic.vmware.plist


sudo launchctl load /Library/LaunchDaemons/com.rectalogic.vmware.plist

In Step One, the Terminal command has single quote marks, not double quote marks (all in one line with a space between Install and DVD). You can copy and paste it from below:


touch '/Volumes/Mac OS X Install DVD/System/Library/CoreServices/ServerVersion.plist'

Agreed, and it also is unsupported by both Apple and virtualization tools (parallels, vmware, etc.), so while it might be a fun hobby to get going, I would not rely on it as a solution for day to day productivity. The best solution here is to either avoid upgrading if you still need Rosetta or similar tools that Snow Leopard offers, or update your applications to work with the new OS (for most there should be an updated option).

Thank you both for your kind words!


Ivan Expert seems to have stopped moderating comments on those two posts in mid-November, 2011 (including mine), so please let me know your concerns directly, here.


My research started with these posts:


http://www.ivanexpert.com/blog/2011/08/snow-leopard-as-a-parallelsvmwarevirtualb ox-guest-os/


http://blog.rectalogic.com/2008/08/virtualizing-mac-os-x-leopard-client.html (NOTE SEE ALSO: The comment by David Martorana)


http://jackofallit.wordpress.com/2011/08/13/running-snow-leopard-under-vmware-fu sion-3-1-3-on-lion/


AND I did some brushing up on Mac OS X Unix and showing/hiding Files/Folders in Mac OS X

This doubt may sound a little dumb but I'm such a noob in these subjects, are all these steps able to do in a computer that came with lion from factory? 'cause i had been looking for downgrading my OS in order to use apps like Logic 8 (and so on...) but the answers i found differ in this: so if you had a computer that came with snow leopard in the beginning and you upgraded to lion you can downgrade to snow leopard again, but if you have a computer that came with the lion OS from factory there's no possible way to downgrade to snow leopard. That's the reason of my question 'cause i don't want to waste any money purchasing the snow leopard dvd in order to make the partition you're talking about if it's not going to work.


Thank you very much in advance, please answer as soon as you can!

maybe i explained myself wrong, i have a computer that CAN'T be fully downgraded to snow leopard (or at least, that's what i read in forums), so that's why I'm wondering if making a downgraded partition would work properly, to answer your questions:


1. My computers is an imac lion 10.7.2 (I purchased it a week ago)

2. as far as I know Logic 8 is a Powerpc application (that's what my computer says when I try to install it), i don't know if it needs rosetta but what i know is that it works perfectly in a snow leopard system. (By the way, Logic 8 is a music software -like Cubase or Protools-)

3. no

4. no (i don't even know the use of this lol)

Yes, there is a newer version of Logic that actually works in Lion, but due to some other matters I am not interested in purchasing it. To me, the best solution would be to have a partition with the snow leopard system but I am not that sure if it will work, so that's why I'm asking if you are somehow sure that your proposal may work in a computer that came with lion from factory (i wouldn't have a problem paying for that snow leopard system if i'm sure it would work).


I can't seem to find a trial version for Logic 8 but well, I'm totally sure that it would work in a snow leopard system 'cause I've tried it.

Mutassi wrote:


Yes, there is a newer version of Logic that actually works in Lion, but due to some other matters I am not interested in purchasing it. To me, the best solution would be to have a partition with the snow leopard system but I am not that sure if it will work, so that's why I'm asking if you are somehow sure that your proposal may work in a computer that came with lion from factory (i wouldn't have a problem paying for that snow leopard system if i'm sure it would work).


I can't seem to find a trial version for Logic 8 but well, I'm totally sure that it would work in a snow leopard system 'cause I've tried it.


A Snow Leopard partition will not work for a new Lion iMac.


I am sure that you can run Snow Leopard in Parallels 7 on your new Lion iMac.


What I am not sure about is whether Logic 8 will run in "virtualization" mode in Parallels. Does it connect to anything through USB or firewire? Do you print out results?


I tried to read up on the application, but I am not a musician...


I am in LA; nearby to you?

aw i see, i never made a "virtualization" so I thought it was the same thing as a partition. Yes, logic works with external audio devices such as keyboards, etc. and no, i don't need to print out anything.


No, i am not really nearby (i'm in Barcelona, Spain lol). I will ask for more details of the logic software in other sites, thank you anyways, now at least I know there's a possible and sure way of running snow leopard in a lion system.

Thank you for the links, Michael!


And for moving the guide where it can be updated - I ran into the same editing, or rather lack of ability to continuously edit, issue earlier.


Anyway, here are the issues I am currently experiencing while running Snow Leopard in the (currently) latest version of Parallels Desktop, Build 7.0.15094 (Revision 749908; April 5, 2012):



1) Sound does not work


I tried all different settings in Parallels, the status is "Connected", but in Snow Leopard the Sound system preference pane shows no input/output devices.





2) Unable to share my Mac (Lion) drives with Parallels


"Sharing" under "Options" in Parallels is set to share all disks, "SmartMount" is checked, and I even added my drives (2 partitions on one drive, one is my Lion boot partition, the other is just a data partition) as custom folders. Still, no drives or folders show up in VM.





3) Issues with "Boot order"


In Parallels, I created a second, backup, hard drive to use for booting for restoring the “ServerVersion.plist” file onto my main drive, after removing it to use the Software Update (and the Sharing preferences if that gets resolved). I have not yet imlemented the script you mentioned. When I do, perhaps this will be a moot point, but until then... I used SuperDuper! to clone my main drive to the backup drive.


I have the following order in the "Boot order":


Floppy Drive

CD/DVD

Hard Disk 2 (backup)

Hard Disk 1 (main)


"Floppy Drive" is mapped to the virtual drive provided by Parallels, while "CD/DVD" is mapped to my Mac's optical drive, which has nothing in it.


If the "Floppy Drive" and "CD/DVD" are checked in "Boot order" and "Connected", (sure, I'll never need the "Floppy Disk" and will uncheck and disconnect it for normal use, but... for the sake of troubleshooting), the VM boots from the main drive, even though backup is listed first.


If the "CD/DVD" is unchecked and if the "Floppy Drive" is disconnected, whether checked or not, VM boots from the backup drive no problem. With the "Floppy Drive" unchecked or disconnected, the VM boots from the backup drive only if the "CD/DVD" is unchecked -- disconnecting it does not solve the problem, as it does with the "Floppy Drive".


Using "Select boot device on startup" didn't work at first either -- the VM always booted from my main drive, even after manual selection of the backup drive, but after I deleted the main drive, created another, cloned the former backup to the new backup, renamed the former backup to be the main drive, I can boot from the new backup drive. Perhaps a glitch fixed by repeating the process?! So, currently, "Select boot device on startup" works, while the "Boot order" configuration (without "Select boot device on startup") does not. However, I did notice that on the boot selection screen, the main drive is listed before the backup drive (makes sense, it was created first, if that's how it works) and if I don't choose the backup drive (even though it's listed as first in the "Boot order"), the VM boots from the main drive. This seems like a Parallels issue, but I can't verify it without someone else replicating these steps on their system.



I was having additional issues -- crashing System Preferences after deleting the "ServerVersion.plist" file, being unable to boot from the backup drive after deleting the same file on the main drive, but it seems these issues went away after I deleted the offending main system/drive, created a new drive, and cloned the backup to create a new backup. I don't know why this worked (the backup was after all identical to the main), but it did. However, the above-mentioned issues remain.

Ah, the first two issues were solved once I installed Parallels Tools; thank you for that tip in your guide.


Although "Boot order" issues persist, as long as "Select boot device on startup" works, and it does, all's well! There is light at the end of the tunnel! Finally! 🙂


Again, thank you! 🙂

Cautionary Notes:


1. I never save important files in a virtualized environment; even in Windows XP. I use File Sharing to access all of my important files from my Macintosh HD and/or my many external HDs connect to my Mac and all saved files are also saved there.


2. There are two types of computer users: those whose hard disk has crashed and those who hard disk will crash: BACKUP BACKUP BACKUP - I use Time Machine to backup my Macintosh HD, Retrospect to backup my Video Library's external HD to a mirror external HD and a LaCie 2TB RAID to duplicate my most important large files. I further use DropBox to keep an offsite copy of my important business/personal files from my Macintosh HD.


3. It has been expressed to me that this solution for installing Snow Leopard in Parallels 7 in Lion may be "broken" by future updates by Parallels with the possibility of no Parallels technical support for Snow Leopard. My environment has worked flawlessly from late September, 2011 through all of my updates through the March 5, 2012 Build 7.0.15055 Revision 740667; and I am about to update my Parallels soon to their April update. IF YOU ARE CONCERNED ABOUT THESE ISSUES: you should install Mac OS X Snow Leopard Server into Parallels 7 as an alternative.


4. Terminal is a powerful program that can have unexpected results if you type in the wrong information. If you follows these instructions, use Terminal carefully: copy and paste my Terminal entries where applicable and/or type them carefully AND always double check the entry BEFORE you hit RETURN/ENTER. If you are shy about using Terminal, wait until PART TWO of these installation instructions is posted, after I have had a chance to obtain some good advice of others to the Part One instruction set.


5. Remember, due to the fact that this forum does not allow me to edit my earlier posts, I am keeping an updated instruction set here:


http://forums.macrumors.com/showthread.php?p=14799174#post14799174

As you are not able to post on MacRumors at the moment I wanted to ask what happened when you updated to the latest April 5, 2012 version of P7?

When followed, the MR instruction set only gets a P7 comment to use SL Server.

softwater wrote:


Good work Michael. I shall be linking to this!


🙂

Thank you!


Remember, since the MacRumors copy of the Instruction Set is editable, it is most up to date (although, going forward, I will post modifications here chronologically):


http://forums.macrumors.com/showthread.php?p=14799174#post14799174


Actually the only serious typo I made here was the mistake of using double quotes (") in the Terminal instruction in Step One instead of single quotes ('). The other clarifications of Terminal commands were because they broke into more than one line and the spaces were hidden by the line breaks -- when copied and pasted, they work fine.


I will continue to update the Instr 00004000 uction Set once I start to receive some improvements over my work (whiich of course improved the work of many others!).


Does anyone know how to modify a package on an image file of an Installation DVD? If there is a way to achieve that modfication, it could remove some of the later Terminal commands.

FangSuede wrote:


When followed, the MR instruction set only gets a P7 comment to use SL Server.

I have posted on MR - Troubleshooting Step One; a more detained discussion of completing Step One. Double check your process to be sure you are not making an error and let us know how you fare:


http://forums.macrumors.com/showthread.php?p=14832074#post14832074

My experience in following up on the assistance offered by MichaelLAX has been 100% positive. In addition to solving some huge problems for me, Michael was more than generous with his time expended guiding me through the initial installation and set up.


I’m now running Snow Leopard with full Rosetta function within Parallels Desktop on an OS X 10.7.3 Lion system. It works!


For those needing Rosetta after upgrading to Lion, some have suggested continuing to run Snow Leopard on a separate partition or on an external drive. This might be a satisfactory, but somewhat cumbersome, solution for some users, but I believe this will work only on Macs which have not had Lion preinstalled. I also have an old G4 PowerMac still running Tiger OS X 10.4 11 (and not upgradeable), but this machine won’t last forever. The above “solution” will be compatible with a new Mac purchased in the future.

I’m the professional landscape photographer to whom Michael referred in some previous posts.

In early March I began investigating the implications of Apple’s iCloud (and Lion) changes, mainly because of concerns about maintaining my @mac.com email address. I have no reason to doubt the assurances of some posters on these forums that such mail will continue to work with Mac Mail in Snow Leopard after making manual account settings changes – even after June 30th. On the other hand I received four different opinions from the four Apple representatives I queried about this issue in March.


I depend on some legacy PPC only software for my business – software which will never be upgraded to Universal or Intel versions and for which there are no substitutes or alternatives.

Many high grade film scanners were long ago discontinued, or the manufacturers have exited that business. I also have many old AppleWorks drawing documents which cannot be opened in Pages. The Lion compatible (Intel) versions of some essential utilities for my Epson 4880 printer were released by Epson last December (Epson LFP Remote Panel and Epson Printer Watcher), but these updates are missing many of the useful functions of the previous PPC versions. A fully functional Intel version of the software for my i1 Display 2 colorimeter hardware, used to calibrate monitors, won't be available until September.


From June 15th until late September I’ll be in a remote location in Montana where dial-up is the only practical option. I’ve had to purchase a new modem (ZOOM 3095) since my Apple USB modem (purchased from the Apple Store in June 2009) won’t work on MacBook Pros with Lion installed (even when running the above Parallels “solution”). The “Safe Place” software that I had been using for years to store 189 encrypted passwords is PPC only. It required a full day to transcribe this data into the newly purchased 1Password application.


I could provide several further examples. This entire experience, except for my contact with MichaelLAX, has left a bitter taste and consumed an inordinate amount of time. Most of my friends and acquaintances who are Mac users have been completely unaware of these pending issues. I think that subsequent to June 30 there will be many who are completely surprised – and a resulting PR fiasco.

Parallels 7 Update: June 4, 2012 Build 7.0.15095 (Revision 768120)

I can now confirm that the latest Parallels 7 update of Build 7.0.15095 (Revision 768120; June 4, 2012) works with both a previously existing Snow Leopard Parallels environment and a new one I created today.

Once again, these direction have been moved to MacRumors, since that forum allows for modifications and I keep the first post up to date, without having to review all of the following posts:


http://forums.macrumors.com/showthread.php?t=1365439

Hello,


seems that apple changed anything during the last updates, also for 10.7

I still use PD 7 and my installed 10.6.8 worked fine for the past years.


Since some days, it won't start - with upcoming error-Message "An invalid Version of Mac OS has been installed".


Is there any kind of ... workaround for this?

I only need SnowLew some times for the mast few apps and don't want to waste 100 bucks für the server-version...


Thanks!

While there are some troubleshooting tips here:


http://forums.macrumors.com/showpost.php?p=14807433&postcount=3


Now that Apple has reduced the price of Snow Leopard Server by 95% to only $20, the best investment for saving time and trouble in the future is to create a new Parallels virtualization for SLS.


Snow Leopard Server is available for $19.99 + sales tax & shipping costs at 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only).

I always advise that you save your data outside of the virtualization environment.

Thank yo very much!

This links solved my Problem. (You can use any MacOS-Version to fix this issue...)

Your advise is correct not to save important data inside a VM.

I only need 10.6 for _one_ application and save the results outside...

MlchaelLAX wrote:


For reasons that have been expressed very often on this forum (primarily Rosetta and the ablitity to run PPC-apps) many people have been asking me to put together in one place the results of my research on this topic. I have taken all of the research that I have found, and refined and improved much of it.


This thread, as Part One, will look at the long process for completing this result; the so-called "not easily accomplished in three steps" process. It will be followed later by my and hopefully others, suggestions for the "easy" way.


Why the long process first?


• Some people appreciate being able to roll up there sleeves, do it yourself and achieve the satisfaction that comes from successful completion of the project;


• Just like I have made improvements to what I found in my research, I expect others will offer improvements to what I have to offer; and


• If the "easy" way is offered first, there will be little encouragement to improve the long process.


What is needed:


• Installation of Parallels 7 in your Lion computer - I will expect this step has already been completed.


• A fresh copy of the Snow Leopard Installation DVD (and not a machine specific, nor restore disk that may have come with your computer).


• Use of the programs Disk Utility and Terminal, both of which are in the /Applications/Utitities/ folder.


What are the steps that will be taken:


1. Preparation of the Snow Leopard Installation DVD for use in Parallels 7


2. Installation of Snow Leopard into Parallels 7 (and optionally installing Parallel Tools)


3. Upgrading Snow Leopard to 10.6.8 and other available upgrades


4. Creating a backup of the completed process.


I will be offering each step, one at a time...

User uploaded file

It will also require the use of Text Edit located in the Applications folder within the Snow Leopard partition...

Thank you to all of the internet sources that contributed to help me compile this solution!

deleted comment

Good work, thanks! 🙂

Due to the fact that this forum does not allow for continuous editing of earlier posts, I have moved the most up to date list of instructions here:


http://forums.macrumors.com/showthread.php?t=1365439

Sorry for the incomplete post (if you saw it just now) -- hit the wrong button. I don't know how to delete a post.

Received my free Mac OS X Snow Leopard install DVD from Apple today!


Are you a subscriber to MobileMe? Log-in and you can get one, too!

Good idea, Michael. Thank you. 🙂

Good work Michael. I shall be linking to this!


🙂

[reserved]

Glad I was able to help you out! 🙂

Installing Snow Leopard Server into Parallels for DUMMIES:


http://forums.macrumors.com/showpost.php?p=17285039&postcount=564