Archive. This is an archive of the Apple Support Community. Discussions are being restored and soon you will be able to read and post here again.
Henrik From Maribo
User level: Level 1 (9 points)

Clicks - Sound and vibration Apple Watch Ultra 4

I had a Apple Watch 1, that used to make clicks and sound when I tapped my code. Now i bought a Apple Watch Ultra 4. And I cant get it to make any sound or vibration. What Can I do ?

Posted on Nov 2, 2026 9:58 AM

1 reply

poonam_kumawat
User level: Level 4 (1,080 points)

Nov 3, 2026 10:24 AM in response to Henrik From Maribo

Your Apple Watch Ultra 4 should support both sounds and haptic (vibration) feedback. There are separate settings for these, so let's check them individually.


1. Turn on sound

On your watch:

  1. Open Settings → Sounds & Haptics.
  2. Turn off Silent Mode.
  3. Increase the alert volume.
  4. If Automatically Adjust Volume is enabled, try setting it to Louder.


2. Turn on vibration

In the same menu:

  1. Tap Haptics.
  2. Select Prominent.
  3. Make sure haptics aren't set to Off.
  4. Enable Crown Haptics if you want to feel clicks when rotating the Digital Crown.
  5. Enable System Haptics for feedback from system controls, if that option is available.


3. Check other settings

  • Turn off Focus or Do Not Disturb temporarily.
  • Restart the watch.
  • Check for a watchOS update.


More info : Change volume and haptic settings on Apple Watch.



Originally posted at discussions.apple.com/thread/256387676