How do I update my netserver to silicon?

mssages wrote:

How do I update my netserver to silicon?

One use or “netserver” is associated with Brother printer printing apps. If you have a Brother printer, which model?

rbhast-59 wrote:

I've got a Brother HL-L2395DW.

That printer supports AirPrint and IPP/IPPS, so no vendor drivers are needed.

Brother recommends using AirPrint here, too.

Given it supports TWAIN, it should also scan with no drivers. It might also support ICA, as many (most?) Brother multi-function printers do, so it may (should?) support scanning via Image Capture app, and possibly also via AirPrint scanning.

There are vendor drivers from 2026, too.

There is firmware version ZH/1.13 from 2026 available, as well. If not already running ZH/1.13, update the firmware. Brother can usually update firmware from the embedded web server, among other paths. To access the embedded web server, specify the printer IP address in your web browser, and log in. (How to get the IP address is below.)

To check firmware from the front panel, see page 533:

https://download.brother.com/welcome/doc100802/cv_mfcl2750dw_use_oug_g.pdf

Page 332 in that same manual shows how to print the network configuration report, if you have no other ,means to determine the printer IP address.

How to configure and use AirPrint from Mac:

https://support.apple.com/en-us/102895

Printer password info:

https://download.brother.com/welcome/doc101074/cv_eng_login_password_insertion_a.pdf

I've got a Brother HL-L2395DW.