My basic advice for migration has always been:
1) Do not attempt to migrate the entire computer via WiFi. It is a recipe for disaster. Similarly don’t try via ethernet cable. For whatever reason, migration assistant just doesn’t seem to play nice with network protocols.
2) using target disk mode is safe and reliable and if you are lucky enough to have an old computer, the new computer, and a compatible cable all on hand, that is a good choice. But if you have to invest in a cable which you may only be using once, think twice. And then think again.
3) my choice for migration ever since Apple killed off the FireWire cable, has been to back up from a TimeMachine (or other compatible) backup source. The reason is simple: First, you should already have a current backup on an external hard drive. If not, that’s where you want to spend a little extra money, not on that above mentioned cable. Second, it is reliable
If you don’t already have a backup drive, take a look at how much of your current hard drive is actually being used. For example, 388GB of my 512GB drive is being used. Then increase that number by 50-100% and round up. Due to the way TimeMachine works, that’s how big your TimeMachine drive should be. In my example a 1T backup drive was my choice. Rotational or SSD are both acceptable. I chose an enclosure from OWC and made my own drive.