Unofficial archive. This is a read-only, community-run archive of the Apple Support Community. It is not affiliated with or endorsed by Apple Inc.

Final Cut Pro Decoding & Rendering Errors

I am having issues exporting a documentary project on Final Cut Pro X (version 11.0). The project is a little over an hour and when I play it back, it seems fine. But when I go to export the project (in even the lowest quality) I receive the following error:


The share operation "Export File: "Documentary.mp4" has failed. The operation couldn't be completed. Error (10008): processing frame. "Documentary" cannot be rendered at 00:37:02:19. Error (-12909): decoding source file. "MVI_5153.mp4" cannot be decoded at 00:00:39;12.


I did some research on this matter and it looks like the file is corrupted? I will mention that my hard drive went bad and I had to get all my data recovered and yes, there are a small amount of files that will glitch. I thought that they were not used in my project, but it seems that they have.


So is there anyway for me to know which clips are corrupted and unable to be decoded or will I have to run the export command every single time (which takes an hour) just to receive an error code? Hopefully there is an easier way.

6 replies

The first thing I'd try is deleting the render cache. Select the library in the browser, choose File->Delete Generated Library Files... Choose All Render files. Manage render files in Final Cut Pro for Mac - Apple Support 


If that doesn't change anything, find a backup of MVI_5153.mp4 if you can since it's been identified as having a problem. You could try cutting around that bad frame of 00:00:39:12. You could also try to Optimize that file by right-clicking on it in the browser and choosing Transcode which will create a (very large) ProRes file to be used instead. If that works, then try the timeline export again and see if FCP finds any other corrupted clips in the timeline.

Unfortunately, I too run into this issue with quite literally every single project I try to export (I'm a wedding filmmaker). The only fix I've found is to go to each clip where there is an error -> Shift+F to reveal in browser -> right click -> Transcode Media -> Create Optimized Media.


For a 9-10 minute film, this sometimes takes me hours of going to the clip, transcoding it, waiting for it to load, re-exporting, and then having the same issue occur until I get to the end of the video. Otherwise, if you have tons of storage and want to do it overnight, you can select all of your files and do that process all at once.


Neither is a great answer/solution, especially if your documentary/any video is over an hour long. I've had this issue for several months and commented on these community boards in the past with similar questions/concerns. I'm not sure why it happens or how to prevent it, but Apple really needs to do something about it.


I'm sorry I couldn't be more helpful, but I wish you all the luck in the world and fingers crossed that Apple sees this and actually does something about it!

@BethkeT73, sorry to hear about this problem. The only past problem I saw you post about was in 2023 about black clips on 120 fps material. By chance, I worked on that, and it was fixed by FCP development within a few weeks on FCP 10.6.6 and Ventura 13.5. But that was only possible because we had several cooperative customers providing information, and I spent many hours documenting the problem.


Edit/add: I now see your prior post here: Final Cut Pro - The share operation “Expo… - Apple Community

That was an unresolved decoding error. You should not have to transcode everything to ProRes to avoid that.


The filename implies it was from a Sony mirrorless camera. To my knowledge, all codecs from those cameras should work OK on the current version of FCP and MacOS. I think you have an M1 Mac.


If we get additional information from you, I'm sure we can make progress on this new problem. If you are using a Sony mirrorless camera, I have several of those, and I haven't seen this problem yet. However, I'm interested in it.


To start, we need the info Terry mentioned. I'd also like to see the full metadata of one of those clips as reported by the third-party utility MediaInfo. Just open the clip in MediaInfo, then do File>Export, give it a filename and copy/paste the full contents to a post here.


Edit/Update: I found that I don't run into this issue if I import everything during the setup, select Create optimized media, and then let it buffer/load everything in overnight! (Or at least this worked for my latest project lol)

To me, that suggests corrupt or non-standard media. Answering our questions above could help get to the bottom of the issue and save you from needing to create enormous ProRes optimized files.