Unofficial archive. This is a read-only, community-run archive of the Apple Support Community. It is not affiliated with or endorsed by Apple Inc.

I cannot transfer my tapes from my Sony DCR-HC17E to my MacBook Pro 2020

I have some old tapes with vid's of my kids and would like to transfer these to my Mac.


After doing research on this challenge, I already do have:

  • a firewire 4 to 9 (800) cable
  • an Apple firewire 800 to Thunderbolt connector
  • an Apple Thunderbolt to USB-C connector.


IMovie 10 does not recognize the set-up, so I cannot start import. Have switched playback on and off. Downgrading to iMovie 9 cannot be done anymore.


Anyone a clue on how to move forward? All help is appreciated. Thank you.

10 replies

Try importing to QuickTimePlayer or using the Image Capture app on your Mac.


Try toggling your camera on and off, and getting the camera playing before starting the import.


There is still the possibility that one of the cables or adapters are defective, or that the USB-C socket is not working. Possibly the export function on the camera is not working correctly.


If you have another Mac, or a friend has one, see if you can import into that one.


-- Rich

In the link that Keith provided be sure to try the advice provided by David Ros.

No guarantee but worth a try.


" Hi. This same issue was driving me crazy, then I realized there is a privacy setting that blocks iMovie from accessing ANY "cameras" -- built-in FaceTime or a DV camcorder.

Go to System Settings => Privacy & Security => Camera, then look for iMovie in the list of apps and allow it to access the camera."


QuickTime does the job! Thanks for the suggestion.


iMovie does not recognize the recorder. Also tried on another Mac.

The Thunderbolt 2 to Thunderbolt 3 adaptor sold by Apple is referred by them as a Thunderbolt 2 to Thunderbolt 3 ( USB-C) because it has a USB-C type connector .

Many people refer to this as simply " Thunderbolt to USB-C connector" .

I believe that the author, BCDE, is using the correct adaptor.


You are probably right, but sometimes folks use dodgy things they find on the internet. It does not appear to be an issue on his end, but on my 24" iMac, you have to make sure to plug into the USB-C Thunderbolt, and not the USb-C USB-C. Arrrgh!

Thanks for your suggestions Keith. However, I am still stuck.

Have bought a different pin 4 to pin 9 cable on Amazon as the other 2 connectors are Apple branded and should do the trick. Hope that it will work.

Another gotcha is the legacy device support linked to in the article. I did not know this was a thing until I started writing the user tip!

Thanks for thinking along with me. Changed the settings, but it didn't work

Great. Glad it worked for you.


— Rich