Unofficial archive. This is a read-only, community-run archive of the Apple Support Community. It is not affiliated with or endorsed by Apple Inc.

Imac late 2009 not booting into macOS

i bought 2 iMac late 2009 both with no hdd. i put a SSD in one and hdd in the other. both iMacs refuse to boot into macOS just displaying a white screen with grey question mark folder. So i tried to boot of a usb with macOS. but the iMacs refuse to give the option to boot off the usb even when trying difrent key combinations form the apple website which don't open anything or do anything. But they both will boot onto a windows install media usb. any help would be great.

4 replies

What is the USB drive you used to try to boot the iMacs?


You can try to boot the iMacs using Command + Option + R to see if you can boot to the macOS 10.13 High Sierra online installer (assuming those iMacs at one time had macOS 10.12.4+ installed at some point in the past). Unfortunately some Macs may only boot to the older online installer for the OS which originally shipped with the Mac from the factory (or oldest one still available) which would be macOS 10.7 Lion.


If you have access to another Mac from Late-2009 to Mid-2018 booting to any version of macOS 10.11+, then you use the instructions in the following Apple article to create a bootable macOS 10.13 High Sierra USB installer:

Create a bootable installer for macOS - Apple Support


Or if you have access to a Mac from 2007 to 2015, then you can create a bootable macOS 10.11 El Capitan USB installer. This way you can start with El Capitan, then afterwards upgrade to High Sierra.


Otherwise you will need to find the original gray system Restoration DVD for your exact model iMac to restore the system to OS X 10.6.1 or 10.6.2. Or if you can find a retail version of the OS X 10.6.3 Snow Leopard Upgrade DVD, then that will get an OS onto the iMac so you can then upgrade to macOS 10.11 after which you can upgrade to macOS 10.13. You will not be able to use the original OS X 10.6 Snow Leopard Upgrade DVD since it won't have the necessary system drivers because that version was released prior to the manufacturing of your iMacs.


Holding just the Option key at startup doesn't show boot choices?


What format is the SSD & HDD?

Did you try swapping them over and do you know if the SSD and HDD you’re using work?

As noted you need to ensure that the drives you are using are (1) functional and (2) correctly formatted using Disk Utility, not some included maintenance app. Second, which OS are you trying to use? That iMac accepts the High Sierra OS. Nothing later.