Unofficial archive. This is a read-only, community-run archive of the Apple Support Community. It is not affiliated with or endorsed by Apple Inc.

Can’t print with iPadOS17

I have been printing reliably to an AirPrint HP printer from both my iPhone and iPad Pro until today when I updated the iPad to 17.0.2. I can no longer print from my iPad. I am still connected to the same network as the printer and the printer shows up in the print dialogue box with the correct name and settings. When I execute Print everything seems to runs normally and the Print Center shows the document progressing normally and then clears. Nothing is printed by the printer and the printer queue shows nothing is waiting. I can still print the same document(s) from my iPhone running IOS 16.x.

24 replies

Dave,

I had the same issue with an Kyocera laser printer, old but very quick duplex office printer, worked perfectly under iOS 16, would be recognised in the printer dialogue by iOS 17, but then quickly disappeared and would not print. Would not take a firmware update.

As I understand it, the older printers had an earlier version of AirPrint (Bonjour) 1.2.1 (2003 - 2015) which it seems is no longer supported by Apple Inc. The current version (?) is 3.1.0.1 dated April 2018 as far as I can tell. Printers which support AirPrint 3.1.0.1 should work. Unless a firmware upgrade to 3.1.0.1 works for your printer, iOS 17 won’t AirPrint to your device. Check with your printer help desk what version of AirPrint they support.

I got around this by configuring an AirPrint (Bonjour) print server running cups Bonjour print services, this is open source, (cost me $50) which connects via USB to the printer, only pulls 5 volts and solved my printing problem without having to buy a new expensive laser. Hope this helps.


SVB67 wrote:

HP LaserJet 400 color M451dw


Ah, such “fun”. The HP published specs for that printer don’t indicate AirPrint support, which means vendor drivers and apps are necessary. Conversely, the printer manual for that printer does indicate AirPrint support. And the manual indicates that a firmware update might be required for AirPrint, and to visit a particular HP link, and the HP link is unavailable. Turns out the embedded link in the manual is different from the displayed link, and the embedded link apparently also wrong and the displayed link (when manually transcribed) works. From the manual, it also appears the firmware update tool for that printer runs on Windows and macOS, and is known as HP Utility. And from the links on the support website, HP is referencing a completely different utility HP_Easy_Admin.app.


Why, HP, why?


Here’s the macOS Admin tool download:

https://support.hp.com/us-en/drivers/selfservice/swdetails/hp-laserjet-pro-400-color-printer-m451-series/4346082/swItemId/mp-218629-5


If you have a Mac, see if that tool can load new firmware. (From what is published, I can’t tell if there even is new firmware. But there are references to firmware updates and firmware versions.)


There is an HP Smart app in the iPhone and iPad app store as well, though the reviews there are decidedly mixed. That app might update the firmware, and that might be able to print.


https://apps.apple.com/us/app/hp-smart/id469284907


You’re probably headed for a discussion with HP support here, as this all seems rather tangled.


Local printer preference is a Brother printer, with AirPrint support.

DaveG100 wrote:

I have the same problem with that model HP printer. This only happens to me when printing any photo under iOS 17 to this printer. All other documents print. Last firmware for it was from 2019. I can also tell you that even in the most recent testing release of iOS 17 the airprint issues have not been resolved.


Update the firmware to the 2022A version from 2020, and check again.

DaveG100 wrote:

It is strange because the printer has always supported AirPrint and worked perfectly with iOS 16 and below. Something in 17 changed. You can see all the Bonjour information in the current firmware.


Short answer: You’ll want to discuss any potential AirPrint support with HP. Ask about the firmware. They’ll likely suggest loading the latest driver kit.


Long answer:


AirPrint uses Bonjour as a dependency, but Bonjour is available entirely independently of AirPrint.


Many (most? all?) network-connected printers now support Bonjour, but those same printers may or may not support AirPrint.


AirPrint is effectively a superset of IPP/IPPS. Interestingly, that Bonjour network display shows IPP, which the online HP tech specs for that printer don’t reference. The printer’s user guide does mention AirPrint, but mentions a firmware upgrade may be required. I’m not sure which doc here I believe.


The Apple listing of AirPrint printers also doesn’t include the LaserJet 400 Color M451dn.


The user guide lists HP Utility for Mac as the firmware update tool. I’d guess some of the other HP tools more recently offered also include firmware display and update features.


This reply is specific to the HP LaserJet 400 Color M451dn.


If you should decide to replace it: Which Printer Should I Buy? - Apple Community


Restart both the printer and the Wi-Fi router, and try again.


Then check the HP printer for any available firmware updates.


For more help here, what is the full name of the specific model?


(HP has a billion or so different printer models, and too many with very similar model names.)


Techguyuk wrote:

Look here, lots of other users are having AirPrint problems


One of the causes over there was an add-on VPN client, per that thread.


Hi Jan


raspberry pi mini, running cups, easy to setup, about an hour see script below, I run it on a Pi 3, will probably run on a Pi 2, connect printer to one of the USB ports, when done just disconnect mouse keyboard and screen and put it behind yr printer. Runs on a 5 volt supply. Will keep config if you have to reboot the device. You will see it as a AirPrint print option from IOS 17 and Sonoma.


You can control printers and print jobs from remote browser window in your phone or iPad or laptop.



https://linuxhint.com/install-setup-airprint-raspberry-pi/


hope this might help

I have the same problem with that model HP printer. This only happens to me when printing any photo under iOS 17 to this printer. All other documents print. Last firmware for it was from 2019. I can also tell you that even in the most recent testing release of iOS 17 the airprint issues have not been resolved.

HP Envy 7645


Confirm the firmware is at least 2022A from June 29, 2020, too.

Solution

Go to your printer's, if Epson, IP address. Enter it in Safari Browsers window. Ignore the warning that the site is not secure. Then Network and then on the left, AirPrint

Go to IPP and select port 9100. say Ok and then on the next screen it should say Airport Set up complete

DaveG100 wrote:

The last firmware version available for the Color LaserJet 400 M451DN is version 20190306 from March 2019. Are you referring to a different printer model?


I was referring to HP Envy 7645 which is the most recently-referenced printer in this thread.


There are driver updates for the Color LaserJet 400 M451dn from a couple of weeks ago; from 31-Oct-2023. I don’t see firmware listed, but having that buried in some driver kit wouldn’t surprise.


It’s unfortunately not an AirPrint printer, nor seemingly IPP/IPPS (for macOS or other platforms), which means it’s a pretty limited choice when vendor drivers are unavailable, “unworking”, or undesirable.


The lack of AirPrint also means that printing requires a vendor app for iPhone and iPad.

Apple have modified certain parameters of image-as-a-pdf sent to the printer. Interpretors on most of the Printers are not able to undertsand what the IOS17 client is sending.

While most of the printers expect the pdf to be a standalone document, the new implementation of the IOS17.2 expects the print to be a combination of pdf and metadata sent. Which most printers are unaware of.

Its a simple fix for the printers, if one starts combining metadata with pdf, every printer will start doing it out of the competition.

1 firmware update on both printers


2 download and install iOS apps from Epson and HP


3 replace printers

Many thanks for that, Techguyuk. Information much appreciated. Especially interesting since you have actually tested the device in question. I shall take a closer look at the article. Again, thank you!

Jan, forgot to mention, you can control, run, multiple USB printers using this solution, it’s the sort of project that school kids can do, so it’s not terribly demanding! You. Can copy and paste all the command lines into the pi terminal, from the script, quite quick to do. Have fun.


HP LaserJet 400 color M451dw

Ditto on Ipad 5th gen and IOS 17.0.3 Have shut down and restarted iPad and router 3x's

Both Epson WF 7720 and HP 7640 don't appear to be selected.

Have done that to no avail.

HP Envy 7645

Problem solved for me, built small 5 volt AirPrint print server, couple of hours work, ($50), works with my legacy Kyocera printer via USB cable, works with iOS 17.2 from my iPad and iPhone sorted!


The last firmware version available for the Color LaserJet 400 M451DN is version 20190306 from March 2019. Are you referring to a different printer model?

It is strange because the printer has always supported AirPrint and worked perfectly with iOS 16 and below. Something in 17 changed. You can see all the Bonjour information in the current firmware.




Hi Techguyuk,


Any additional information about this print server?

Sounds good.