Unofficial archive. This is a read-only, community-run archive of the Apple Support Community. It is not affiliated with or endorsed by Apple Inc.

M1 MacBook Pro audio glitch

I cannot locate a relevant thread here, but there are reports all over the internet, including several audio forums and Apple dev. forums regarding audio glitches on M1 hardware.


The audio crackling or popping can occur in any application and is frequently (perhaps always?) accompanied by a console message like the following:


3587 HALS_OverloadMessage.cpp:222 HALS_OverloadMessage: Overload due to HAL client proc exceeding io cycle budget

The audio defect, and console message occur *almost every time* I use an application with audio. I am running MacOS 12.6 on a MacBookPro18,3.


Internet lore on the subject suggests deleting the audio plist files in /Library/Preferences/Audio/. I have not found that to be a reliable fix for the problem.


Has anyone discovered a reliable solution to this problem? Please help, Apple.


[Re-Titled by Moderator]


40 replies

I had exactly this until I changed from using a belkin USB hub to attach my interface. It was driving me crazy as my older 2017 macbook pro gave me no issues. I connected my interface - a focusrite Clarette 4 USB, directly to my M1 macbook, and all the glitch issues just disappeared and have not returned. Bliss! I'm now convinced that there are major problems with audio and certain USB-C interfaces.

I have an update as I think I have found the issue in my case. I had my focusrite Clarett connected to my macbook via a belkin hub. It has always been great until recently with no issues. Yesterday I was having such a bad time with the noise issues that this morning I disconnected everything and just had the macbook connected to the Clarett and it was fine! I reconnected via the belkin and the problem came back. So for me the problem was caused by the belkin which only had the Clarett and an external backup drive connected to it (which wasn't being used for the audio work). Even reconnecting an additional work SSD to one of the other USB-C ports and then opening a project from that SSD was okay, but reconnecting via the belkin was an immediate return to glitches and pops. Weird because it has been fine up until a couple of months ago, and the belkin seems to be working perfectly so long as I don't connect the Clarett to it.

Hey I just had the worst bout of glitching etc sound dropping from youtube, itunes and in my DAW and even standalone Komplete Kontrol.

I would say it became worst with new update 13.4.1

I'm running M1 Mac Mini 8gb, 256gb, 1TB External. just for reference.


I was running through my M-Audio Air 192/6, I love this unit because of it's huge topside volume knob.

I also have a Focusrite Scarlette SOLO. I don't like its form factor quite as much for studio work. BUT.......it totally cleared up my lags, glitches, static. Both at 44.1 standard settings into my monitors.

Whatever is happening on the backend its far better handled with this swap. Unfortunate, but just my two cents. I know we don't all have spare DAC's sitting around but if you do, simple re/re could be worth it.


EDIT: 10 minutes Later. I was running the DAC's from USB-C into the standard USB Port. I think that my sound cards were actually being UNDERPOWERED! the USB-C port gave me a visual indication for the Direct Monitor LED that the Standard USB did not light up.

Amateur move on my part, I have not plugged my M-Audio back in but I suspect it should be fine.


Just wanted to give my anecdotal 2 cents, just to add to hive mind.


Ventura 13.3 has fixed this for me on both my MacBook Pro M1Max and Mac Studio Ultra.

I've upgraded to 13.3 on both MacUltra and MBProMax and it fixed the issue on both.

(having been dealing with this since Ventura was introduced)

I THINK I FOUND A SOLUTION on another forum :)))

someone wrote an app solved his problem and I downloaded and installed it and my sound cracking problem seems to be SOLVED !!!


it is a free app called "eqMac"


I hope it works for you too guys .


SOLVED : install the free app "eqMac" and the sound problem goes away . tried it on my M1 Max Sonoma 14.3. . it worked for me and I hope it works for you too. found this solution on another forum by chance . pls let me knoe if it works for you too.

I just switched from a Focusrite Scarlett Solo, to a MOTU M6, and my glitching stopped happening.


If possible, test using other audio interfaces, might solve the problem faster than waiting for Apple.



I have an RME UCX II and Ableton Live. I was getting an audio cut out about every 30 seconds to a minute. I then closed Safari, and haven't heard the issue since. I've been running Firefox, and haven't had the issue with it.

There's a desktop client download for M1 users on Zoom, in their download section

for Zoom Meetings. It's just below the description of the main download...not the button but a link in text only, you have to look for it. It helps with audio issues for M1 Macbook pro. Solved my issue with the background noise filters and Original Sound issues.


I was accessing it through my Zoom account, and it was a mess. The desktop app works great.

Same here. M2 Mac with Ventura 13.4.


I suspect the problem is caused by the HDMI monitor I have which has some super crappy speakers. Because it's my main display, the OS wants to send audio there.


My external headphones won't connect sometimes. Just today the audio playback started glitching with gaps every few minutes. I didn't have these audio problems with the Mac tower I had in university more than 20 years ago. It's unbelievable. I bought this to edit video and audio.


I can't seem to track down a way to remove my Asus monitor as a sound output device. The minus button is grayed out in the Audio MIDI settings window. I can't find a HAL folder in /Library/Audio/Plugins there are only these folders: Components, MAS, and VST – and they are all empty.


I used the Terminal to show all hidden but still finding nothing.


defaults write com.apple.Finder AppleShowAllFiles TRUE
killall Finder


My only workaround is to use Terminal to restart the audio process so at least I don't have to restart the whole rig every time this happens, which is several times per day. It used to be possible to restart this with Activity Monitor, but now you have to use Terminal. UGHHSHHSS.


sudo killall coreaudiod



I'm having the same problem. I'm loosing audio from all the outputs of the macbook (through USB, hdmi, or even the macbook speakers themselves). Very annoying when you're having a call...


One solution that works (for 5min :') ), type this in a terminal:



sudo killall coreaudiod


I am clutching at straws here, but I did get some temporary relief by force quitting a process I observed in the activity monitor when there was severe audio glitching happening.. It repopulated shortly after force quitting, but just an idea. (screensharingd)



Thanks to those of you sharing these issues. I have a Macbook Air M1 w/ 16 gb of RAM and have been trying to use it as a mobile recording solution when not in my recording studio. However, when trying to record on the Macbook Air I get static pops and glitches that are being recorded directly into audio tracks regardless of the buffer size selected. I have tried various DAWs (Presonus Studio One 5, Presonus Studio One 6, Logic, Garage Band) and all of them have the same issue. The glitch will occur intermittently and ruins a take or a live recording and is totally unpredictable. This makes the system unfit for use. It will happen whether I am recording 1 audio track or a total of 16 and the glitch will occur across all tracks and be recorded on all of them. I have a Presonus Quantum 26x32 thunderbolt 2 interface that is using the Apple TB2 to TB3 adapter and an Apple TB3 cable. I'm connected directly to one of the TB ports and have replicated the issue with both ports and have also replicated it with and without anything connected to the other TB port (eg. monitor with KVB or power supply). This same hardware setup works excellent on my main PC in my studio which is running on an intel based Win 10 machine that is now 5 years old. Thus, I think the hardware, cable, ports, and whether an external monitor is connected or not via the other TB port can all be ruled out. If anyone has a solution or a similar setup please share. In all honestly, I'm wondering if anyone with an external professional level interface is able to actually record with an M1 macbook air because it seems like the system is underpowered. For example, if I am live recording a track in Logic or Studio One and add a new track while live recording and then arm that track to bring in another microphone into the live session the audio will glitch. This is the only way I've been able to force the "glitch" to occur. This can be done on a 5 year old intel PC without an issue so I'm not sure why the M1 can't handle it. In all my remote recording sessions I've had to pack up my PC minitower and an external monitor because the M1 macbook just isn't reliable. Anyhow, I appreciate anything anyone, including Apple could share on this issue.

Go to system updates in general and update the M1 monitor. Fixed mine without issue. I was having same problem

Greetings grumpbus,


Ensuring you're getting the audio quality that's expected from your Mac is important and it sounds like you've walked through great steps thus far. If you haven't already, you'll want to complete the steps listed below. These steps are specific to troubleshooting speaker related issues on your Mac.


  1. "From the Apple menu , choose System Preferences.
  2. Click Sound.
  3. Click the Output tab, then select the built-in speakers. If you don’t see built-in speakers as an option in the Output window, contact Apple Support.
  4. If the Output volume slider is set low, move the slider to the right and test again.
  5. If the Mute checkbox is selected, deselect it and test again.
  6. If you still don’t hear any sound, contact Apple Support."


If the internal speakers on your Mac aren't working


If you continue to have issues after completing the steps, you'll want to reach out to Apple next so they can look in to this issue further. You can find their contact details via the link below.


Contact - Official Apple Support


Take care!


I experience the issue when playing music through my Sound BlasterX G6 usb DAC. The sound cuts around every 10 seconds. But when I switch to internal speakers, all is good. It was not the case by the past on my Intel MBP

It's not an audio/speaker problem, it's a M1 hardware problem. If I could turn back time I would never have bought the M1. It's only a year old and is a piece of junk. I have sent it to Apple and back again, run through numerous trouble shooting help, tried all the online advice, and it always comes back.

I am a music producer and I have to restart my computer at least twice or more times a day to stop the popping and glitching. The more programs you have running the worse it gets, until things are so slow you can't even load a page.

I have been a Mac user for years, but this has seriously made me consider never buying Apple again. They've lost the plot.

Very true. I have the M1 Max 16-inch Pro. The audio glitches every few minutes. It really interrupts the listening experience. I'm listening through Apple music so it's not a software compatibility issue. If Apple's own software can't play perfectly, I don't know what else can. Actually, as I just clicked on the Post button for posting this comment, the audio popped.

I am wondering if this is related to what I am observing.

It seems that every time an alert is fired off. ie Doing something wrong in Finder, triggering an alert sound (which you can't turn off like you can other notification sounds, you can only turn it down), I get an interrupted audio stream in Apple Music for example.

Even worse, it will cause ProToolsUltimate to stop playing or recording and throw an error, regardless of buffer size etc.

Also affects the playback in Logic Pro X.


I am using a Mac Studio Ultra that is otherwise not breaking a sweat, so it seems that it is something to do with that trigger fires off the sound.


Update: I just upgraded to Ventura, hoping, by some miracle, it would fix this horrible audio glitch problem.

If possible, it has actually made it worse!

It's nearly impossible to record on Logic without the glitch stopping a recording mid-track. This is now a major issue.

I'm looking for ways to move my logic off this terrible M1 and go backwards instead of forwards.

Worst decision to buy an M1.

Apple, in my opinion, has gone down the toilet.

:(

Actually I went to the same conclusion last night. After pluging my DAC directly to the mac and not through the USB hub improved the quality drastically. I still have some randome cuts, but they happen way more rarely than before. I'm wondering why though, my hub do not lack energy, it is powered by a 12V alim. I use a KVM and no issues on Window PC.


EDIT: I was wrong, when I started coding in XCode again, the sound became very unstable again.

Having this issue with my MBP M1 Pro for almost 2 years and none of the updates and releases solve this. For me, reducing memory usage reduces the frequency, but does not eliminate the problem. Also, not fan of turning of apps to run Logic or listen to Spotify. Btw, I see these logs in Console when the event happens.


HALS_OverloadMessage: Overload due to the driver taking too long


Its extremely annoying that a $2500 laptop has audio issues from the 90s. There is nothing superior in your product, Apple, if you cannot get this fixed.


What are saying? My system is up to date on Mac OS 13.2.

"M1 monitor"?? What is that?

This ONLY happens to me on my work 14" MBP with an M1 Pro chip. My personal M1 MB Air works fine.


I like listening to lossless audio and have a DAC hooked up with monitor speakers, so this problem is pretty irritating. It does not happen when I use my Airpods Pro, but I'd really like to not have earbuds in my whole workday.


Any fixes would be appreciated.

I've been trying to deal with this problem for more than a year, and honestly, it's absurd that a machine with a price tag of over $3,000 can't play audio correctly. It's even more frustrating because I genuinely enjoy working with Apple devices, but this issue renders them practically unusable as workstations for developers like me.


I don't believe there's just one issue at play here. At times, it's the memory pressure, the core audio daemon, or even "insulated cables" (seriously?) - Apple's response in this thread to "check your audio settings" is practically offensive. You'd likely receive an equally unhelpful response by visiting any Apple Store. They're well aware of the problem but feign ignorance to avoid massive recalls.


Super frustrated, Apple, do something!

I’ve fixed the problem!

I ditched my $3000+ 2022 M1 MacBook and went back to my older 2017 intel mac. I updated and loaded Ventura, LogicProX and all the updated plugins and it all runs like a dream.

I’ll only use the M1 for menial work, that all it’s good for.


[Edited by Moderator]


This is exactly the same issue I'm having! My RME Babyface Pro works perfectly with my M1 Macbook Air (2020) but when I try with my 14" MBP (2021) it glitches every few minutes.


I'm not having the issue with the built-in speakers though, but that doesn't help for me, as I produce music and use my RME all the time.

I have a 14" Macbook Pro M1 w/ 16 gb of RAM and get constant audio glitches through internal speakers every 10 or so seconds with nothing connected to the Mac except power. I am running 12.3 Monterey. this has been going on since I bought the machine for remote logic recording in 2022. Model is MacBook Pro (14-inch, 2021) MacBookPro18,3. Apple M1 Pro - 10 cores CPU ad 16 GPU.



Same issue

I really detest that we all know the ropes so well regarding all of the possible issues on how one check inputs , outputs , speakers ect !

its an M1 issue

so incredibly upsetting and cannot fix it and have lost valuable time

so bizarre . It just randomly cut out sound . Infuriating

This driving me crazy. I use ableton and have to turn off and delete those library files all the time.


it also happens using Apple Music on the laptops speakers.


Mad no solution yet.

Hey, same here. Have you resolved the issue?

I've still not resolved this issue. Have been speaking with Apple about it and still have not fund a resolution.


Tell me more @mattrixxAustralia?

I haven't yet upgraded because a lot of my plugins for LogicProX don't have an update.

Recording is killing me with this glitch.

This is extremely frustrating. We deserve at least an official response. This is supposed to be profesional hardware.

Have just updated to 13.3.1 on both MacStudio Ultra and MacBook Pro M1 Max.... Issue is still there!! Aaaargh.


Identical situation, I feel exactly the same this is the worse mac I have ever bought for audio applications.

Just received new M3 iMac, same audio issue. Randomly all audio cut outs for a moment. Does not matter what the audio source is. Very disappointed and frustrated.

Yes, unfortunately, this problem has returned on my systems again. Initially OS 13.3 was working extremely well, but has since deteriorated once again.

I am having to use CPUsetter to "re-nice" Logic to -20, to prioritise its audio. (I do the same with Pro Tools when using that too.