Unofficial archive. This is a read-only, community-run archive of the Apple Support Community. It is not affiliated with or endorsed by Apple Inc.

Printer presets not saving

Since upgrading to Ventura, my printer presets are not saving. I already had working printer presets in place before upgrading, such as 2 page B&W from drawer three. Part of the preset works. It will print 2 page B&W, but it doesn't pull specifically from drawer three. I've only noticed a problem in the drawer selection and the scaling options. I tried creating new presets and those didn't work either. I also updated the driver and it didn't correct it.


I've read posts from other people will similar issues, but the only responses I see are how to set up a preset. Not knowing how to create a preset is clearly not the issue. It doesn't seem to be printer specific (this happens with my Brother printer and my Canon printer), nor computer specific (this happens with both of my Macs). I had hoped this would be fixed with 13.1, but the problem still exists. Any ideas?

65 replies

Hi LemmyIan,


That was really helpful in that I think was able to narrow down the issue. Are you by any chance printing via AirPrint?


Per Canon's instructions I have been printing directly to the printer via the printer's IP address. Each time I choose a preset the tray is not remembered.


If I print via AirPrint the presets are remembered. The reason Canon wanted me to print to an IP is because their driver allows me to set specific paper types and weights. Not sure how important that is now. But is seems like AirPrint resolved the issue.


Thanks again for your help.





I have noticed that if I save the preset from an Apple app it will stick. I usually use Acrobat to print PDFs. I saved a preset, but next time I wanted to use this preset it was back to the default settings. Then I opened the PDF in Preview app and saved the preset from there. This time the preset retains the settings. I can also use the preset in Acrobat. It all works.

I had an issue where the wife's iMac with Ventura wouldn't print in color despite the fact the presets were correct, etc. I believe I had set black & white to be the default but despite selecting color in the App and in the printer presets it still printed in black & white. I had to remove the printer in macOS and re-install it. Then it started working. It was an HP Color LaserJet M452dn and I had installed the HP Smart App from the App Store to help with installing the proper drivers. Mileage may vary with other printers but it might be a bug in Ventura where removing and re-installing the printer resets the preset configurations.



Give this a try: boot into Safe Mode according to How to use safe mode on your Mac and test to see if the problem persists. Reboot normally and test again.


NOTE 1: Safe Mode boot can take up to 3 - 5 minutes as it's doing the following; 

• Verifies your startup disk and attempts to repair directory issues, if needed

• Loads only required kernel extensions (prevents 3rd party kernel/extensions from loading)

• Prevents Startup Items and Login Items from opening automatically

• Disables user-installed fonts 

• Deletes font caches, kernel cache, and other system cache files


NOTE 2: if you have a wireless keyboard with rechargeable batteries connect it with its charging cable before booting into Safe Mode. This makes it act as a wired keyboard as will insure a successful boot into Safe Mode.


OK, I think I sorted it out. Whatever software you're printing and trying to save your presets from (in my case Photoshop), change it with something else (in my case Firefox), save your preset in that other software, then your preset will be available in your intended software as well.


I tried for weeks to save presets from the print dialog that Photoshop provides. Nothing worked. I switched to Firefox, saved my preset in Firefox, then found the preset in Photoshop, alive, well and working as expected. I hope this helps.

Hi Scott, try opening the print settings in the Preview app and save the preset there. Then load that preset in the print panel of your preffered app (I'm using photoshop). This method wo 00004000 rked for me.

This is an Apple issue and I am not sure they are aware of it. At least support does not know what is going on.


I am using Ventura on an iMac and Macbook Pro. I print to a Brother and Canon printer. The printers ignore the presets and print to the top tray ( I have 2 paper trays) and the prints are double sided. The only way around this is to set the print settings I want each time I print.


  • Brother said they do not make drivers for Apple any more and I should call Apple.
  • Canon spent a lot of time with me trying to resolve this but said it is not their problem and that while their drivers manage the prints, it is MacOS which manages the print presets.
  • Apple support said they are not responsible for printers.


Hopefully Apple will recognize there is a problem and get this fixed fast.



Perhaps I didn't make myself clear enough. It happens on EVERY computer, not just a specific computer, and I'm very familiar with adding presets, having done so successfully for years. So far, I have been unable to find a single Mac running MacOS Ventura that will save the paper source as a preset; I have tried five so far. The Safe Mode method prescribed by "Old Toad" did not work either.


If I select a specific drawer and save the preset, it will automatically return to Auto the next time I use it. I do a lot of printing on a daily basis, and I need different jobs to be printed from different drawers. I find this extremely annoying. The presets worked before Ventura. Until there is an actual fix, I believe the only option is to downgrade the MacOS.

The engineers at Canon were able to reproduce the issue. It is definitely a compatibility issue with Ventura. Now that they know about it, they are working to find a fix. Thank you all for your suggestions and patience with this. It's not resolved today, but will be in the future.

I've received an update. As I stated in my last reply, the Canon engineers have been able to reproduce the issue. They have now said, "It seems to be an issue on Apple’s end as other manufacturers are having the exact same issue. We’re hoping Apple can provide a fix soon."

I agree. I'm experienced for years on Mac printing. Since updating to Ventura, including 13.3, any time a paper tray option is selected such as Tray 1, Tray 2, Tray 1 (manual) the presets always revert to AutoSelect. S 00004000 o each time I use a preset I must drill down to the manual tray option. Another annoying thing is that is used to work on my legacy HP in USB but now it will not work at all in Ventura 13.3. Only AutoSelect and AutoFeed will allow a page to print. Yes, I was on with hp support for 3 hours and no amount of restore, remove, generic, wireless, USB options altered this bug. Seems like it is an issue in Ventura that affects how any drivers (which have not been changed for years by Apple as AirPrint drivers. Very frustrating indeed.

No worries, msknvw. No, not AirPrint in my case. But that seems to indicate the same problem: whether presets will remember tray and other settings depends on which program the system print dialogs are triggered from. Some do, some don't. Firefox and AirPrint seem to do the trick so far.

Hi Roger,


Saving the preset in the Preview app worked for me too. I can now use that preset to print from Photoshop and it remembers the settings! Yes!

Have you installed and run any "cleaning", "optimizing", "speed-up", anti-virus or VPN apps on your Macs? If so which ones?

Setting up and saving the preset in an app other than Photoshop (I used Firefox) seems to have done the trick for now. I find the quality setting for my Canon prints from photoshop wasn't sticking before. But I always found I had to CONSTANTLY check to make sure the Mac didn't override my save. I have a set of instructions for myself and in bold it says CHECK THE QUALITY SETTINGS before printing.

Appears to be fixed on 13.5. For me, anyway.

You may have used it for years but with each new system it becomes more destructive. It's. considered by most of the experienced contributors here to be akin to malware. Just do a google search: site: discussions.apple.com cleanmymac and you'll get a multitude of posts where CMM seriously compromised the system's or an apps performance.


Why? There is no reason to ever install or run any 3rd party "cleaning", "optimizing", "speed-up", anti-virus, VPN or security apps on your Mac.  This documents describe what you need to know and do in order to protect your Mac: Effective defenses against malware and other threats - Apple Community and Recognize and avoid phishing messages, phony support calls, and other scams - Apple Support.  


There are no known viruses, i.e. self propagating, for Macs.  There are, however, adware and malware which require the user to install although unwittingly most of the time thru sneaky links, etc.   


Anti Virus developers try to group all types as viruses into their ad campaigns of fear.  They do a poor job of the detecting and isolating the adware and malware.  Since there are no viruses these apps use up a lot of system resources searching for what is non-existent and adversely affect system and app performance.


There is one app, Malwarebytes, which was developed by a long time contributor to these forums and a highly respected member of the computer security community, that is designed solely to seek out adware and known malware and remove it.  The free version is more than adequate for most users.  


User CMM's uninstler and then you can check to see if you've removed all of the supporting files by downloading and running the shareware app Find Any File to search for any files with the application's or the developer's name in the file name.  For CMM you'd do the following search(es): 


1 - Name contains cleanmymac


Any files that are found can be dragged from the search results window to the Desktop or Trash bin in the Dock for deletion.


FAF can search areas that Spotlight can't like invisible folders, system folders and packages.  



I have absolutely no idea why, but after going to the Epson site & creating a ticket there, I was directed to some (automatic) things to try, one of which was to remove the printer & add back. I had done this multiple times before, but for some reason my presets are now staying .... for a couple of days now. I still can't see the color management/extra paper choices I had before, but at least this is something ....

Hi bvoyl,


If your printer presets are not saving, we'd recommend first following the steps outlined here and make sure you're following exactly as outlined: Save frequently used print settings for routine printing on Mac


This will ensure that things are set properly. If you're already doing that, and still have issues; we'd recommend reaching out directly to Apple to look into this with you further to resolve this: Get Support


Cheers.

I can confirm that this is also happening with Toshiba networked printers. Specifically, the Paper Feed selection is not saved either in a Print Job Preset nor in a Custom Preset.

While it seems clear to me that the problem is in macOS, if anyone should find a printer for which this works, it would be nice to hear about.

@msknvw Your last bullet is especially annoying, since the problem is clearly not to do with "the printers." Apple has online documentation (Save frequently used print settings for routine printing on Mac - Apple Support) about how this is supposed to work; they couldn't have documentation if it was a sub-system for which they are not responsible. I would interpret that as a CYA for a problem that Apple Support knows they can't fix, since the problem is within the OS.


Anyhow, I encourage everyone having this issue to file a bug report (Feedback - macOS - Apple). I believe that they do not monitor these Community pages.

Yes. 13.0.


That dialog will look different depending on your hardware and driver, but also the software you're printing from.


Regardless of how they're configured to look, try to force the Print using system dialog option in both software (Firefox and the one you'll eventually be printing from). The trigger for that will also most likely look different from mine.


The second key part is to save the preset in Firefox as a Print Job Preset.

every morning I go to Product Feedback - Apple and complain you should all do the same. and maybe maybe it will get fixed. I think apple is to busy with their vision pro, and stopped focusing on fixing things.


I just installed Sonoma and hoped the printing problems resolved. Nope! I cannot believe this problem from Apple. Any recent driver for my Brother laser printer will not work. Presets will not save and printing files longer than 15 pages freeze and self delete. I have returned to Brother's CUPS drivers from 3 years ago and generally this solves the problems. There is no way Apple is not aware of this issue. I believe they check this forum, I have personally called them many times before Sonoma and they diligently state they are unaware, suggest reinstalling the OS, nothing works and I get escalated to high level support. They seem unaware of the problem and have absolutely no solutions. I understand other posters in this forum have discovered certain work arounds, like saving presets in only Apple apps... really? Come on Apple, this is totally unacceptable. Printers have not become dinosaurs yet in our "paperless" office!

I'm not sure what version may have fixed this, but it's been working properly for me since updating to 13.6.3.

Years ago MacOS would not remember "Canon" presets, or Canon would not remember, or whatever. The big Epsons would do it too. Then they all figured something out. Everything was working great with MacOS and the Canon PRO4000 through Big Sur, then they "improved" the printing in Ventura. The new interface sucks, buries everything, does not remember presets, but at least it does not change print colors. So you get to set paper, sizes, etc., for every different print you make.. Just when you thought you were out,,,,,,

OK, this reply does not help other than to let you know you are not alone....

what's going to be? I'm sending feedback every single day, and some of my employees also. this is crazy! no solution. I'm going nuts!!!! I would want everyone reading this should send feedback Feedback - macOS - Apple

bombard them with feedback maybe they will fix this. I think they are too busy with visionPro which I'm not even so excited about.

C'mon Apple lets get back to the olden days when an update fixed problems.

its not fixed it was now released. so I'll give u exactly what is working and what is not working:

  1. so in Adobe programs or other apps that are not apple it basically holds the tray selection but then when u select different setting for example hi res or other things it again goes back to autoselect the tray. CRAZY!!!!!!.

1.a. in adobe programs the preset doesn't work at all, even u set the preset in another app or program or even if u set it here, it does not have the preset settings u set them to CRAZY!!!!!!!

2.Apple apps: I tried this with notes. it doesn't hold only for once. after u do print and u come back lets say u wanna print again with a correction, its back to auto everything also the hi res is back to low res. and everything else. CRAZY!!!!!

2.a. but here u have if u use preset yes preset works. but why should I need to make a preset for every option I wanna to, lets say now all defaults I want to use besides the tray lets say, its all CRAZY CRAZY CRAZY BEYOND BELEIF!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

It's always been hit-and-miss with printer presets in macOS for as long as I can remember, but in Sonoma (probably starting with Ventura) and my new Epson printer, it's a complete miss. Like many others in this thread, I cannot get settings to stick in a preset, most notably the paper tray and quality settings. It's easy to blame Apple, but it's probably something that gets stored in tandem with the printer manufacturer's software, and they may have not followed new rules Apple set. Just guessing of course. Really hoping this gets fixed...

Please do file a bug report (Feedback - macOS - Apple). I believe that Apple does not monitor these Community pages, but that bug reports do influence which issues they prioritize.

no it doesn't help. we never had problems with the preset. what we do have is the tray settings. that's the only bug here. "tray settings" is automatically going to auto select and not holding on to the tray we chose. Yes also in presets. but the problem is not the presets cuz all other chosen options in presets hold, its only the tray selection which doesn't hold when leaving that screen or in presets.

Hi LemmyIan,


Could you go into a little more detail on what you did. I cleared my presets and created one which uses the second tray on my printer. I tried what you described in Firefox but Apple is still not remembering which tray to use.


Thanks.


My print dialogue does not look like that at all , maybe it’s your printer that has a different dialogue page , I have Xerox and Oki and both look different so I don’t know what to say. U sure u updated to Ventura?

I'm not sure why but maybe u right its the printer. but I have a few Xerox machines and 2 Oki different machines with different software. and in any program its just switching back to auto select even in Firefox its not holding at all, even for a second u go away from that screen - clicking print u come back its back to auto select. the only reason it is possible to print to certain trays through Firefox or Chrome or Safari, is because the print button on all 3 browsers are right by the same screen. so it works for 1 time only. but any other program which has an ok button first and then print, after the ok is clicked it switches back automatically to auto select. but your solution is just not working at all the preset in any program even in Firefox switches by the tray to auto select. I don't know. something not adding up, it's completely not working. Is your machine Mac Studio or something else. maybe it has to do also. because I cant believe that just your printer specifically does work and I have 6 other printer software or 7 I think, and all are not working only yours. does not make sense. and it seems from all indicators that the issue is not printer software related. something telling me we are not on same page.

Booting into safe mode is a suitable support suggestion sometimes, although here it is effectively useless.


VPNs serve a legitimate purpose on MacOS, applications like 'Suspicious Package' for Package Inspection is useful. Applications like 'TaskExplorer', 'KnockKnock' or 'Grand Perspective' are all valid and useful tools for ensuring your Macbook is free from anything potentially harmful and clean.





[Edited by Moderator]




so today I thought lets do something maybe it will help. I removed all printers. went to Xerox website, went to oki website. downloaded the latest drivers and installed anew everything. u think this helped NOOOOOO! it just made things worse. now i think all the messages are right, because until now I basically only had issues with the tray going back to auto select, now all settings are not saving. this is craziness beyond belief!!!!!!!!

another problem I realized. when selecting more than 1 copy lets say 2 copies or more in the printer dialoge window. 1. it does not give u the option to collate. 2. when the 2 copies hold - which is like 1 of 10 times - it sends the document 2 times to the printer. so if its a heavy document it takes very long to print. crazy crazy crazy beyond!!!!!!!!!!! the printer system in Ventura is soooooooo messed up its crazy. I just cant believe this from apple.

I am trying to save specific color settings for sublimation printing and I am also no longer able to save any presets, it's stupid annoying because I have to change so many settings each time I want one print. Any fixes yet?

I am having a similar issue with Ricoh printers at work and printing booklets from Ventura (multiple Macbooks tested). The A4 Booklet preset will not save/remember the A3 paper size we have chosen and defaults to A4 which makes an A5 booklet, it also won't remember staple settings requiring us to change both before every print job. It has added a lot of extra work to an already busy time of year.

I stumbled upon this issue after dropping 3k on a M2 MBP that was going to be doing a lot of printing on business level copiers (multiple trays, finishers, etc.). The lack of print presets was so disruptive to getting work done I ended up just saving files to be printed to a shared drive and printing from a windows machine in the office. Because the hardware was brand new I didn't have the option of downgrading to a previous version of Mac OS.



[Edited by Moderator] 


somewhat. but not really like its holding on to the settings u set, but not for long lets say after a few minutes it goes back to the defaults, even when the app or program is still open. and presets are not saving with the settings you set it to, not at all.

I run my printing business with Macs and we are having the same problem. It's infuriating we pay for the software that runs our printers and the problem is coming from MAC OS. We've tried everything (really everything I have a computer science degree and have spend over 12 hours on this problem) the print settings will not save. I'm thinking of switching our business over to Windows I can't believe I'm saying it!

I'm going through this delightful scenario now, too. I jumped several versions of OS & am now on Sonoma & having the same problems with presets (Brother & a brand new Epson - which WAS working early December, now it's not). I have also LOST all the detail color management choices that I had beforehand (both printers), plus the paper choices have changed! I spent some time with Apple support yesterday & they didn't seem to have any idea .......... I'm about to tackle Epson support, but after reading these disheartening posts I don't hold out any hope.


What a crock!!!

Having this problem in macOS 14.2.1, going to try the Print System Reset but don't expect anything to help.


I do a lot of printing via shell scripts and it seems like those settings are being honored, but need to do some further testing. Might be a workaround for this.

Thanks. Reinstalling was my first step. Unfortunately, it didn’t help.

None of the above except for CleanMyMac, which I've used for a few years.

Thank you for your detailed explanation. I was not aware of the threat that CleanMyMac presents. I will do a complete uninstall and report back with the results.

That actually did not fix it. :( I'm going to reach out to Canon before I give up on this.

Thank you for the feedback link. I have reported it. Hopefully others will as well.

same by me on all my Xerox machines since I've updated to Ventura , and I have 8 Macs here. all have the same issue. its driving us insane.

thanks for letting me know, I didn't know that, I did it. and hopefully it will be fixed.

I am also having this issue with my Canon Imageclass MF453dw, running the most recent driver from Canon.

Almost Everyday I report this bug to Apple but to no avail. They have had already 6 or 7 updates to Ventura and at no point was this fixed . Crazy !!! It’s driving us in sane!!!

Well yeah. This method saves all settings in the preset, includi 00004000 ng the tray.

IT DOES NOT

Hi, msknvw. This works in Firefox version 113.0.2, so maybe worth checking the version too.


I wasn't allowed to post the screenshots


[Link Edited by Moderator]


I’ve tried what u said and it’s not working I’m sorry. We’re not on the same page for some reason .

its coming to a point that I'm actually really 100% getting demented. this bug is getting me really mad.

I've never used any of these; having same preset-not-saving problems as OP

not fixed yet and I have no idea when it will be, some are telling me that in Ventura 13.5 its fixed but I don't believe it.

its just crazy and 00004000 it does not look like Apple has any intention of fixing this.

Running Ventura 13.5:


SOME printer settings now stick, but no benefit to me from setting them in an Apple app.

Two-sided printing doesn't stick anywhere.

Some tray settings stick, others don't.

MADNESS! MADNESS! MADNESS!

It's very odd: almost all the Apple Support pages for the various threads on this topic have become unavailable.


Given that Printer Presets are clearly an ongoing concern, I wonder why?

I can't believe this still isn't fixed. I tried saving the preset in Preview but that doesn't work for me; some settings saved, others did not. So incredibly frustrating.