Unofficial archive. This is a read-only, community-run archive of the Apple Support Community. It is not affiliated with or endorsed by Apple Inc.

Transferring Mini DV Tape Videos

I am using iMovie to record videos from old MiniDV tapes. The process runs through the entire tape and says it was successfully captured but when I look at the clips only a few minutes of the tape is actually there in iMovie. Where did the rest go?

5 replies

Try the RECORD feature in QuickTime Player which is on your Mac.

If successful you will need to bring the clip into iMovie.

https://support.apple.com/en-gb/HT201066


I wonder what would have happened if you had stopped the import into iMovie just before the end of tape?

You could try this by importing again and stopping import after say 10 minutes. Do you now get 10 minutes instead of the 2 minutes you got before?

Thanks for getting back with that information.

Usually using a Mac with FireWire ports to import is very reliable.

Could it be that the issue you had with only a few minutes imported into iMovie, is with just that one tape and the others are OK?

Your Mac was probably shipped with iMovie version 9. If you still have that then you could see if importing into iMovie 9 gives better outcome.

I tried the QuickTime, it captures the video but for some reason the sound is very low. If you know how to resolve that then that should work.


I'm sure if I stop and start the importing on iMovie frequently throughout the recording I should be able to capture most of the tape but then 1) the video clip will be a compilation of mini broken clips and 2) I don't want to have to babysit the transfer for the entire 60 minutes as I have about 20 tapes to import.


Does anyone know what the "professionals" use when you pay them to do this for you?


Regarding low volume with QuickTime Record feature.

If you are going to import this into iMovie for editing then you can increase the volume in the timeline before you export the finished work.

What quality setting did you select, High or Maximum? High will produce H264 and Maximum will produce ProRes.

ProRes files will be much larger than H264. Try the opposite quality setting for a short section and see if the volume is improved. Otherwise just increase the audio level in iMovie.

The " professionals" could well be using the same kit that you are, assuming you are using a DV camcorder, but some may be using DV recorder /player decks, which can be quite expensive.

Chances are they are using older Macs with FireWire ports and older versions of iMovie.


Some people have a problem importing DV tape into iMovie and QuickTime Player, could you tell us what OS you are

running , what age Mac you have and what version of iMovie you are using and also what cables /adapters you are having to use between Mac and camcorder.This would be useful to others on here .

Many thanks.



I am on an older Mac that still has the FireWire port in the back. OS OS X El Capitan 10.11.6. I movie version is 10.1.5 and QuickTime Player is 10.4. Not sure how old the Mac is but I would say approximately 7-8 years old. I was using a FireWire directly between the camcorder and the computer.