In recovery mode (cmd R) you used to be able to remove filevault from your drives.
with catalina, I can still go to recovery mode, disk utility, but not the uption to decrypt it from there.
how can i do this? Greets
In recovery mode (cmd R) you used to be able to remove filevault from your drives.
with catalina, I can still go to recovery mode, disk utility, but not the uption to decrypt it from there.
how can i do this? Greets
Posted on Nov 15, 2019 9:48 AM
Nov 22, 2019 10:59 AM
Reinstall the OS from scratch and when the
part that says “active FireVault”, uncheck it this time unless you’re a multinational multi-million dollar corporation. Only about 5% or less of users need it.
Nov 22, 2019 9:22 AM
If the Recovery HD is corrupted, then most likely you could not boot the machine from the Recovery HD. If you are able to boot from the Recovery HD but cannot disable FileVault, then you probably have some other disk-related problem and will have to reformat the disk while in Recovery HD.
Nov 22, 2019 10:49 AM
My apologies. I meant starting up the computer or re-starting. You can follow these instructions with which you should be familiar:
Boot from the Recovery HD
The Utility Menu appears on a gray screen. There is a menubar on the screen. The Utility Menu has four selections: Restore from Time Machine backup; Install macOS; Get help; and, open Disk Utility. In the lower right corner of the Utility Menu is a button labeled, Continue. You can open any of the options either by double-clicking on the option or by selecting the option and clicking on the Continue button.
So, to do what you asked:
Install El Capitan or Later by Erasing the Disk
If possible, back up your files.
If you don't want to erase the disk, here is how you reinstall macOS over an existing system without erasing the disk:
Reinstall El Capitan or Later Without Erasing Drive
Please be sure you back up, if possible.
Nov 29, 2019 11:05 AM
You need to do what I posted previously - Erase and Install. You no longer can recover your files unless you have a backup.
Nov 15, 2019 11:09 AM
Disk Utility itself cannot disable FileVault. One needs to use the Security & Privacy preference panel to enable or disable FileVault. I have no recollection of controlling FileVault using Disk Utility in Recovery Mode. Have you checked the Utilities menu in the screen menubar? I don't think you can evoke System Preferences while in Recovery.
If you can boot the computer normally or Use safe mode to isolate issues with your Mac - Apple Support or Playing Safe- what does Safe mode do?, then you can use Security & Privacy to disable FileVault. Keep in mind that decrypting the disk takes quite a long time to complete.
Nov 17, 2019 2:01 AM
The problem is, I cannot log in my account. I have the correct password, but the loading barr gets filled up till half of it, the mac turns off.
I was told this could be a filevault issue, so I wanted to decrypt (to later encrypt again after solving the issue).
however, i can not enter safemode. I can enter recovery mode. Where it used to be possible to select the locked hard drive in utility, and then there was a File menu (to choose unlock). However, I see no file menu.
Nov 17, 2019 9:47 AM
When you boot from the Recovery HD, you will be presented with the Utility Menu on a medium gray screen. The menubar is at the top of the screen. If that is not the case for you, then the Recovery HD is corrupted.
Nov 22, 2019 10:09 AM
Thanks, I guess I can boot from recovery HD (not sure, what exactly do you mean by that - sorry it’s the language barrier, not really familiar with the english technical terms).
If I indeed am able to boot from Recovery HD, how can I reformat the disk while in Recovery HD, and will this somehow change / remove my files?
Nov 28, 2019 8:32 AM
Thanks I tried, well with catalina instead of el capitan. But the problem is: there isn’t enough space to do this.
so my issue is:
I cannot log in my account, because halfway up loading it freezes. They say I have to de activate FileVault but how can I do that without logging in?
The second option is to reinstall current ios, so any broken software is fixed. However when I try that, it says not enough space.
so I’m still stuck at recovery mode.
Nov 22, 2019 1:28 AM
How can it be corrupted and is there a way to test, or to get back to normal?
Originally posted at discussions.apple.com/thread/250857317